Yes you’re right, the tapered axle will come out with the bearing still on it.
I believe the manual I got from Mike’s carbs said 1 7/8” from the bottom of the gasket to the bottom of the float at the toe end.
I will edit to...
Good morning Oldpappy!
I would like the parking brake handle please.
Maybe the T86/90 clocked the 18 a bit higher than the T14, requiring (more) spacers to keep it out of the body?
Just a guess…
Good morning Buildflycrash!
Funny, I was just looking at @Fireball pics of his new jeep. Looks like he has 2 more spacers than you.
I hate to say I’m envious, but Momma always taught me to tell the truth!
Today I installed a cheapie tachometer and a horn button. I already had wiring harness up on my list, but getting behind the dash again may have...
Thems the ones what brings the grog rrrrr.
Couldn’t help it, my high school team was the Pirates…
If I had space…
Chalk up another one for @Norcal69
just swapped one in. Thank you!
Not interested in buying, but curious about the backspace.
[ATTACH] Found this with a quick search
I bought this kit from Autozone....
That question may be a bit over my head but I would think no, as the flywheel only bolts on one way.
If you are going to replace the clutch and pressure plate, no need to mark it.
Same goes for the flywheel, it only goes on one way.
I forgot to thank you all for your thoughts and replies.
[ATTACH] Just a test run after some carb issues.
Top of the hill, Montana de Oro.
[ATTACH] Once again, it seems the biggest problem was between my ears :confused:
I made the slight adjustments mentioned above, no better or...
@Glenn, I started with a timing light, supposed to be 5* before, but ran terrible, took advice from this forum on a different thread about the...
I have the adjustable ball stud if you want it.
Or if you want to test with it, and dont want it you can send it back.
Well then, so much for me keeping it clean lol.
Separate names with a comma.