Additionally, the snap ring that comes with the Crown replacement bearing is too wide. Reuse the original. A lot depends on keeping track of the...
Herm sells them. http://hermtheoverdriveguy.com/t-15-transmissions The TSM covers the process. What year? I'm not going to assume it's a '73....
Everything changes for 1976. The '72-75 Jeeps are an update of the original CJ-5 and CJ-6 from the 50s. The frame was lengthened 3" and the hood...
The TSM has a list of factory oversized bearings. The factory would use specially sized bearings if needed. You should look in the TSM for the...
With the driver on the left side, my impression - the right spare is more practical.
The F134 is a really old engine design (1930s) and the head design is ... different. I believe the most successful hop-up efforts have used super-...
Lots of discussion - https://www.bing.com/search?q=site:earlycj5.com+11"+drum+brakes+what+vehicles Same for your question about the Carter...
If I really wanted flanged axles, I'd search for a '70-71 CJ rear axle. This will be flanged, 30 spline, and offset for the Dana 18. You could...
Brakes, steering and engine are the big three. If you stay with original ride height and tire size, I'd think steering will be ok. The factory...
Others here have gotten responses when emailing technical support at Dana-Spicer....
Suspect you won't have a lot of choice in material. Not a popular application.
That four-cylinder originated in the 1930s, and is heavy, compared to engines with similar displacement. Casting technology has advanced a lot...
Should be easy to find at RockAuto.
Not sure Skyjacker is still available for these 1.75" wide springs. Maybe. AFAIK OME has never made springs for this application. Many here have...
https://www.bing.com/search?q=site%3Aearlycj5.com+replacement+springs
Yeah, twin2's picture shows the Ford solenoid powering the GM solenoid - no battery cable to the Ford solenoid. It's instructive to take these...
Gold-plated version: https://www.parts-express.com/12-VDC-Waterproof-5-Pin-Relay-SPDT-30-40A-with-Metal-Bracket-330-079 They have one for 97c that...
This is a 2100: [ATTACH] About 3 3/8", maybe a skosh more. Typically they are on a fiber and plastic insulator that's about 1/2" thick.
I don't understand what problem you are trying to solve with the Ford solenoid. On first impression, it seems like putting an additional set of...
There's not that much you can see from the outside. Put your head under the driver's side and the linkage is there in front of you. Should be...
Separate names with a comma.