You talking about the one that latches to the windshield hook, when the hood is raised?
OD paint is at least 30% of the price.
Today, I figured out that my YF carb float valve was sticking. Seems to be the fuel affecting the rubber tip. Sanding it lightly "cured" the...
Beware Omix in all things.
That doesn't sound OEM.
I'd expect the front to have a pack nearly as numerous as the rear. Although there were may different set ups.
SeaFoam in every fill-up.
That would be the only thing I'd want to do with it. :rofl:
It must be really old if it has carb adjustment screws!
IMHO, Broncos weren't very special even when new.
I don't have 1600 acres, but I just pile the brush and let it decay naturally. Often I use it in hollows and swales to reduce erosion. Save...
I once had a similar CJ5 with a clutch problem. IIRC there was a plastic bushing/bearing inside each end of the bellcrank tube and they had gone...
Still use caution - the vines etc. can be active even without leaves.
However, I concur this sounds more like a linkage issue, possibly worn parts binding or taking it out of adjustment. Bellcrank bushings, or...
Chipping poison ivy and creating airborne particles of it sounds truly dangerous.
See, to me that is an utterly insignificant amount, given the cost of a tractor, a chipper, the fuel, and the time. Let it rot or burn it.
The Factory Service Manual (FSM) will have much of the information you need. You do have an FSM, right?
I don't think I ever owned an f-head that met that standard.
IMHO, it depends on what it's worth to you, depending on the circumstances. What are your other options, and how much will a few dollars either...
Separate names with a comma.