I have a 29 tooth, but it is an empty barrel, no planetary gears. I transferred the guts to a new barrel to run with the Teralow 3.15 gears. I can...
From my previous experience I have written Herm off as a supplier of anything. Your experience may be different.
Great to hear from you Ryan. Yes, enjoying the LJ a lot and have discovered a few really nice, challenging trails here in Nevada and a couple of...
No one gets turtled like me! Hahaha [ATTACH] Hoping to resurrect this thread with some new/old pics soon.
You will find that the rear locker is also a limited slip that is pretty tight. That, coupled with the auto tranny makes for some great traction...
Congratulations Jeff. You will be very happy you waited for the auto tranny. I'm helping a neighbor install a Rubicrawler next month. Hope we can...
Thanks for checking in, Steve. Rubicrawler is in and the full cage too. Been too busy to post up pics, but soon. Got pics on my phone but need to...
Looks great. You might want to remove the paint from the tranny input bearing retainer. It may keep your throwout bearing from operating smoothly....
Started the Rubicrawler install a couple of days ago. Got the monster looking t-case out. It's not as heavy as I thought. Although I did use a...
It came on a pallet, attached with pipe clamps. The legs were bolted to several pieces of 1 1/2" cold rolled flat stock to keep them from being...
Time for a little update. I have run a bunch of trails from mild to wild this summer and couldn't be happier with the LJ and especially the auto...
I use a chain hoist suspended from the roll bar spreaders.
I had a tank built for me by Boyd Welding in Florida. My stock underseat tank has no baffle unless there was one from the factory, which I doubt....
Eric? That look like Tom and Kevin in the pic. I just noticed that. John Briggs
FYI I have a buddy who has been running Howell TBI on an oddfire for at least 10 years. It did take Howell a fair amount of trial and error to get...
i bought a conversion setup from Summit Racing. It was pretty straightforward. All plug and play, no cutting. It went into a '66 CJ
Did you install the Rubicrawler? I'm looking at doing it myself as it seems pretty straight forward.
I believe there are actually shims designed for distributors.
So, next up is the t-case doubler aka Rubicrawler. Just waiting to move into my new house where I will have a 900 sf shop to work in, with real...
Blue lines could be ARB.
Separate names with a comma.