When I put the D30 in it was a direct bolt in. If you are going to stick with the T14 I would go with a hydraulic set up, the cable set up never...
I went with narrow track D30/D44 w/11" brakes on my build and I'm happy with the results. I also used the heavier springs because I like the look...
When I see a Jeep this modified I always wonder how good the fabricator was.
Wish you could find them like that in the rusty Northeast.
Kind of different. Needs more photos.
1974 CJ 6x6 - barter - trade swap
Welcome to the forum. Would love to see pics of your Jeepsters.
I just about gave two away when I moved and didn't want to haul them. They went to a guy that goes by Flan on the Jeepster Commando club site....
The spacers are also present on Commandos with the D20. Never could figure out what they were for.
I'm sure it's been discussed but why do some jeeps have spacers between the cross member and frame and some do not. Or different number of them?...
Fabricated a headliner for the Jeepster, used acrylic bath panels from Lowes and doubled up foil cover bubble wrap for insulation and sound. Whole...
I like it and more pics please.
This was my major concern. Glad you got it going.
You need to find the wire that fed the + side of the old coil. Use that wire to feed the HEI. If there was a ballast resistor remove it or jumper it.
I'm also computer tech challenged, took me years to figure out how to post pics here.
I just put a HEI in my Dauntless yesterday. I noticed it starts easier and has a smoother idle but did not notice any HP gain.
I've got spare pistons,rods and valve stuff if you need them.
Just down the road from me. I offered the guy 5K and he said he would think about it.
Log into Facebook
I've been looking for one of these for years, will be following along.
Separate names with a comma.