It's all wrong.
That is great advice! I can't agree more, you gotta finish to win.
We have upgraded to adjustable valving 14" resivor shocks but have to keep the...
Unfortunatly it has to be a production motor. Wish we could up the cubic inches but no go.
Thanks for keepin it real!
Good info on the heads, I will poke around. I didn't think i could use the 360's because of the valve issue.
We are stuck with the 304, UNLESS there was a 360-401 CJ that I am not aware of?
The 304 heads are the pits. We are leaning twards just an intake...
We will be racing a CJ7 in the Everyman's Challenge stock class race at King of The Hammers this year.
For you Pirate members, we are team Robby...
AND are his numbers on a stand or at the wheels.
Would love to spend some time tweaking and tuning on the dyno to see what gains...
Rebuilt in '08 IIRC. Bored .30 over.
Going to try to get some more dyno time when there isn't such a croud (Dyno Day)
She did draw a croud in...
Just in case you were ever wondering.
28 HP and 60 Ft Lbs at the rear wheels.R)
No she's not tuned perfect. Fuel is 2 years old and had a...
Dimensionally they are the same but there are many differences.
for starters the M38A1 is 24 volt instead of 12 and will have a valve to slightly...
I think I have 3 good ones at the farm I will give you a good deal on if you decide to go that route.
I originally ran 6.00X16's on my flatfender...
If you want the look of an NDT go with the 7.00 x 16's. The 6.00 X 16's came on some early MB's and the Bantam trailers.
It never seems to leave the garage or pavement much so a 25 should hold up just fine.
My '57 has a Dana 41.
Good Lord! Who could possably need tires that big!:roll:
The Driver's side tire is going the wrong Way dummy.
Gulches here we come!
I wouldn't do that if I were you.
If you are going to buy one locker put it up front.
Weld the rear. it's a jeep. They dont have any "on road"...
They are noisy, think the noise you heard coming out of the jeep in the openeing credits of M.A.S.H. Kind of a roar. Rattle's are bad. Fill...
Separate names with a comma.