After watching the video I had to go out and check mine. I do not have #1 on the post he says it has to be. I do appreciate the way he broke...
Don’t remove the factory residual valve to the rear drum brakes. That one you need. I recently “rebuilt” a caliper on my old Porsche and it...
I’ve got the same setup as Muzikp. Like he said it works great. It’d be fun to add terra low or OD but it’s not needed.
Lubricating the original system makes a big difference. It takes some time to grease the jackshaft - I added a grease zerk to mine so now it’s...
This is what I have and it works great. You definitely don’t want your rifle buried in the back somewhere when you see the...
Great thread guys. I've had the "clutch is like a light switch" problem (and the shaky leg problem) for a long time. I'm planning to redrill the...
I used button head bolts. Painted ‘em black.
I think I got my flares from Collins Brothers.
I also used the Novak adapter. Great product and support. Local shop did my drive shafts. This swap was definitely worth it for me.
I’ve been very happy with my sm420. Use first gear quite a bit. Only paid $75 for it and didn’t need to disassemble. Novak is great to deal...
3b - I have to same hei/vac problem as you. I spent quite a bit of time looking for vac can specs and found a few that would probably have about...
The original on my d30 seems reasonably sturdy. Maybe search for a used one? eBay? I always figured if I ruined the original one I would build...
With these symptoms I would check to make sure the fuel is clean and check for water in fuel. Probably good to dump in some red heet or other...
Difference!
My Skyjacker Soft Ride springs made a huge
It depends a lot on how your gas was made - most of it is not too good these days. I’m glad we don’t get ethanol here in AK. I’ve had good luck...
On my 70 with d30 and warn hubs I had the same problem. Years ago I switched to studs and nylocks. Never had them come loose again.
My 70 flanged 44 has the zerks
Like many others, I gave up on the stock gauge. I went to NAPA and picked up an in dash gauge with matching sending unit. Fairly easy to set up...
Separate names with a comma.