سيارة
There is/was a long thread on the forum about matching the engine color on the Dauntless. It is a old thread. Did a little searching and could not...
I think if you go with the Howell you will need a 4 barrel manifold for the TB. The Holley Sniper 2 G will work on the 2 barrel manifold no...
Need to figure out what to put in the rib of the floor at the cuts. If something heavy hits at that point, I feel it will compress the metal....
Cut the hole and put tank in. Happy with location. [img] Welded some 3/16 flat stock metal to the floor, then drilled and threaded it for 1/4 x...
On a click type torque wrench. When torquing something do you click it One or Two times. Per my conversation with a Jet Engine Mechanic that...
I started this thread to have input on what other people have did with dual tanks. I did a search on the forum and most of the information was in...
My son's 8th grade trip was suppose to go to Washington DC. 911 happen and things changed. They did not go because the parents of one kid did...
I have a issue with the fuel lines under the Jeep running at 58.5 PSI. It's just me, I prefer low PSI fuel lines.
I think there are a lot of owners that would like to have this option When you decide to do it, you need to transfer the location of the tank to...
Started on the rear tank install. Going to cut the rear floor area to make access panel , so the sending can be pulled with out dropping the tank....
Installing a rear tank on my Jeep, kicking around how I want to switch from tank to tank. Did some research on the forum and there where two ways...
What I am looking for is GPH. I am installing EFI, using A FiTech Force Fuel 50004 Force Fuel System - FiTech Fuel Injection Going with...
Not a fan of blue paint, but your Jeep really looks good.
You are using a 18 GPH pump and with the way fuel lines may be run, there is probably some loss in GPH. Been running it for 5 years and I guess...
6 is the average weight of a gallon of gas. Just starting to look for a pump, nothing picked out yet.
Here is the formula GPH=(Max HP x BSFC)/6 BSFC is .5 GPH=( Max HP x .5) / 6
Was looking for a in-line fuel pump for my Jeep, to run a carburetor. Was at O'Reilly's and they looked it up and came up with a Mr. Gasket pump...
I knew this guy that had a 12volt battery in his 6 volt jeep. You talk about a starter spinning fast. He used it that way for years. Could just...
How are the upper part of the doors fit at the Windsheild?I fought mine for hours, still not right
Separate names with a comma.