I would buy it if you were closer to STL.
I like a few of the 1966 features more than the 1971 but all things being equal I would prefer a 71 over a 66.
Nick thanks for your reply.
That statement was based on the only IH transfer case that I’ve ever dealt with a couple years back. So sorry if it’s...
Yeah yet another very nice one from where else but AZ.
I think maybe I like this one more than the last.
Speedometer “gear sets”were manufactured as a single drive gear with various associated driven gears.
In other words the driven gears of various...
I guess it’s not actually VERY rare.
It’s just rare these days to find one in decent condition.
Obviously any vehicle coming from Arizona is...
Yeah Jim we’d love to see the inside of your IH T 90.
Have not found one yet that will convert to a Dauntless bell with T90 C gears.
This thing looks to be in nice condition too...
1963 Willys/AMC J300 Gladiator Pickup - cars & trucks - by owner -...
That looks real clean inside.
Please get rid of the silly putty and put a real gasket on it.
IH used various T90’s between 1961 and 1973.
Most if not all used a 16 tooth main drive gear (input).
So they are most likely to be suitable with...
T90J built inside a T86AA case vs T86AA————
I would say the T90J is slightly superior mainly because of parts availability.
T86AA parts are few...
Saginaw #5691676 also referred to as the “76” box.
This is an 800 series box used on Jeep CJ before about 1980.
They have a 3-1/8” bore.
Yes T86AA is the only case that will fit the 2-5/8” long cast iron adapter and also fit a T90C shift tower.
The only question is which gear set is...
Open it up so we can see the gears.
Likely a t90J gearset inside a T86aa case.
With a late T90c shift tower.
Right, the t86aa and t90 shift towers can fully interchange except that they use different 2nd/3rd shift forks.
Too far....... I have not seen one in my area in the past 3 years .
I need another Jeep T18.
Where is this one located?
I should mention that when you weave a weld puddle from side to side you move the electrode very quickly through the middle of the weld seam and...
Weave the puddle side to side as if it you were welding with stick electrode.
When the puddle moves to each side it hits an area of the parent...
Yes just glanced over those Miller specs.
Looks like it might qualify as the most versatile machine ever !
Millers are probably my all time...
Separate names with a comma.