Yes, I used a buck I made. out of plywood and clamped the piece between.
Worked well. Got to get all the pics off my old computer that went south...
This is a great idea. I have used the 2 part epoxy and I have the gun and the Fusor adhesive.
I do enjoy welding though.
The replacement panels I...
Can't beat that Patina.
That truck rocks!
Looking at those pics, gives me motivation. I like the welds and the way you trimmed and capped the ends tapering down.jigs for the welding.
Got some of both in the shop. Waiting for time to install. Good information. I think I'll try the Neoprene seal when I get back around to the 64 F...
I have thought about spacers out of that engineered wood, or some phenolic plastic.
That is some nice work. I like how it looks close to original, but so much stronger.
I will be getting some rectangular tubing.
What are the rough diameters of your rectangle tubing? Seems that would be even stronger with an actual bottom.
And what thickness is the...
Paul, this looks to be a good project.
Thanks for the pictures.
That looks really good. I like the rectangular hat channel. Thanks for...
This is useful information. I have replaced the hat channels, but worry about alignment when re-mounting the body.
This information helps out a...
Get a motor guard filter to save the plasma cutter from water in the lines.
Motor Guard M-30 1/4 NPT Submicronic Compressed Air Filter - Air...
I like this Jeep. Those Colorado and Arizona Jeeps are very nice.
Helps to see the colors. This gives the codes for cross reference. Thanks.
That Spruce Tip Green Poly is a cool color.
Mine was originally...
That is good to know.
I heard some in the AACA club say they did that, but I haven't tried it.
Thanks for the advice.
Sprayed some Dupont President's Red. Base Coat Clear Coat seemed way too shiny.
I have heard some mix some of the base coat in the clear to cut...
I like spraying the 2 part Epoxy primer over the sandblasted frame and top coating it Chasis Paint.
I will be trying the Fluid Film. I think that...
Got a Genius 7200 when lightening struck my garage and took out my Battery Tenders.
It can charge AGM severely discharged batteries.
I like the POR 15 products, POR15 (because I had it but top coated the last frame with the Rustoleum seemed to work well. Its out back under the...
If you look down the lines, it appears to be hit hard by the dreaded Bondo Monster.
These were very prone to rust and no panels look straight.
Separate names with a comma.