As far as the partial lock up, for me the key was to balance them and set them correctly and then fully pull up the window/hatch and then I have...
I considered it but the way this locks up so solid and required minimal work, I chose this direction but I would be interested to hear
They are made in USA
they use to get from China but now make in house
Same bolt pattern was used which made it easy. Lifts the window...
So in my search for rear window struts for my Myers cab, a link was provided for me on my for sale thread for Al Hanson. They don’t carry the...
Need the driver side, this thing
They were so far off and bent it was hours of trial and error and persuasion
The struggle was real!
It wasn’t your fault, hinges just needed rework
Will send pm on filler pieces
Thank u, that helps!
I’m not sure I will get to fabbing up cornerpost pieces soon. I may just make use of screw holes present and add some flashing to keep...
It appears it goes under the hinge socket also
It will get there, just hammer and vise and some heat to reshape them slowly as they got quite mangled in previous orientation
Driver is smooth and easily slides on/off
Passenger is still a fight,
hinges were a fight(still fighting w passenger) as they were bent to fit when installed wrong.
Will fight a bit more tomorrow, thx...
Better, Swapped the lowers first
OK, looks like it is going to be reworked as opposed to fabricating a new bracket. I think the lower brackets are actually installed upside down...
How do filler pieces attach?
Maybe this was all a workaround for that?
I find it wierd that hinges were not mounted to doors from myers/Orville...
No not filler, they are 2 small u brackets, almost what a door restraint would attach to
the channel maybe still useful as it is to hold a...
Options include at this point deconstruct the doors and drill and fill and use the factory bracket mounting’s or make a new bracket/socket. I may...
Separate names with a comma.