Use a long piece of 1 1/2" or ? size angle iron to help you keep the lines straight and parallel. Do you have access to a plasma cutter? That's...
Nice looking bumper!!
Man, all those fancy gadgets! Just put your purse down and pull it outta there!!!! LOL
I'd keep that one and sell the 80 model just 'cause we need to save another '56 model jeep from the flaming hacksaws. My S/N is 57348 33390 it's '56.
I think the last batch of them were made from unobtainium, and are getting mighty scarce.
I'm from the school of lockrights, I've already have twenty years of trail savy, so I say buy some lockrights and wheel it like you stole it. Just...
Yep, it's the gear retaining nut holding it all together. Get a cold beverage and have at it!
I don't have an Aussie I put in a lockright and have had no issues for the last three years. Model # 2115 for a 27 axle...
Yes I printed them off for reference also. I will send PM now.
Pics are awesome, can you take one of the outside rear corner where it bolts to the tub. I need a pic of the offset in the corner to compare to a...
Need a picture of the lower rear closeout panel between the wheel tubs. Might have to fab one up.:hurrican:
Just ship jeep to me in the warm south and I'll keep it company during the long cold winter.
Not in the driveway yet, but it doesn't have the lower closeout panel for the tub. Waiting on more pics, $350 sounding kinda steep now!
More details when it's in my driveway!!
Yep, glass and regulators in working order too says the owner.
:) Seems like I may have to remove my full cage for this bad boy! :hurrican: :beer:
Welcome to the mix!
1. Keep the V6
2.Sheet metal is avail, remember it's an early CJ, we are a proud bunch!!, keep it that way
Stop it! Your making me want to paint over the OD with a nice coat of red TSC paint!!
Separate names with a comma.