Duo-Fast slap stapler...I've had two for the last 20 years, they still work fine.
Yes he might.
Sweet build. Chevy's suck, but Nate you always make something cool out of what ever you build so this should be fun.
I feel as if I'm fashionably late but still in time:sneak:...Unless he changed his name and moved to Georgia that's someone else...
Get a 220 mig.
I've had really great results with KBS coatings.
KBS Coatings - Rust Prevention - Stop Rust Paint - Gas Tank Sealer - Clear Coat Paints
I love my NewAge Cabinets as well!
There’s something fun about wheeling a flat fender. But the bigger you build the harder a trail you have to hit to get the same thrill.
looks good to me.
sawzall down the fenders at the body, and cut the body mount under the grill and remove. That will give you more room fast. usually not that many...
That's a driver, they are nice for driving screws and Timberlocs etc. Not an impact. Millwaukee makes a 18v FUEL Impact 1/2" drive, it's a beast...
Last time I busted a nut...I didn’t use one of those....
I have one, and it’s a piece of crap, mushed into the nut some and popped off .
It’s great stuff! Try it.
Depends on condition etc. What all is included. I've picked them up for $100 or they are listed for a lot higher sometimes as well.
Forget that pansy 4cyl. Cut out the inside fenders, a little stretch on the hood. Love it!!!
I'd call Herm and talk to him, he probably has a solution.
You gotta be careful with this, a regular pressure washer relies on the cool water going through it to keep the pump from overheating. Supposedly...
I'm looking for a list of all the parts that are T-98 4 speed specific that I should pull off a possible donor.
Obviously transmission and I think...
47v6 Hooked me up! Thanks all for the info, I'll be checking back in as a re-rember how to do a gear swap.
Separate names with a comma.