That's what JEEP stands for, just empty every pocket :D
Nyuk Nyuk Nyuk....
Does the wire form your light switch run to the ignition post on the ignition switch ?
Ok, that's what I thought!
Have used a marine ignition switch?
How many positions would you use for the 65 Cj5?
I see some with 4 positions,accessory,off-run-start!
That's the one I have !
I found Peterson 410 series # V410-15R.
Not original,but they are made in U.S.A & they cost under $5.00 (y)
Found some :beer:
Anyone know where to find a tail light lens for the 65Cj5 ?
Mine has the snap ring that holds the lens in.
All I can find is one's with 2 screw...
I know mine does not have that :shrug:
What is this ? The black plastic/bakeliite bezel ?
I don't see any thing like that on mine!!!
So I had the front end check & all is good.
Must of bin the way it was setting & me just thinking to much :beer:
Have to pull the manifold more and likely ?
The manifold hole.
My f134 exhaust manifold has one drop through bolt & nut on one side,no stud on the other side.
It just has a bolt that tightens up through the...
Thanks guys :)
Yep the alignment shop is the best place to start.
Maybe wheel lean ? I don't know about front end stuff.
May be best to take it to the alignment guy.
Just jacked it up no wobble at all :shrug:
Just had the wheel bearings done with a front brake job last week.
Separate names with a comma.