Question for the electrical folks:
App: 56 cj6 6 volt with generator
At high idle, reading 6.14 at battery.
High idle: Armature to ground 7.0...
I am 10061.
So if I verify I am ten spline. Who can make me ten spline axles to fit Herm's kit? (Yes I am lazy, or tired)
56 Cj6 stock 5:38 44 rear f head
Will I have to pull the axle to get a spline count, or can I be confident it is a 19? Or the...
I have two, 64 with f head and a 56 with f head, #61 off the assembly line if I decoded it correctly.
My F134 Application. I had the same issue. Eventually had to remove the exhaust manifold so I could work on it. What I thought was clean, once...
Thats a beautiful area! Lived in Bonners Ferry for a year, great little town.
Jeep CJ-5 Pre-1965 Medium Red Carpet Original NOS COMPLETE Original Box | eBay
My neighbor is trying to get his trailer up and running. He needs a lunette for a m416 trailer. Any suggestions??? Thanks in advance!
[ATTACH] [ATTACH] 56 cj 6 volt, with generator and Walcks harness. A little dark but hope it helps. [ATTACH]
I had the same issue with a T90c rebuild.
I consulted "metalshaper". I belive he told me to flatten or grind off the little tabs. IIRC
Yes, its still there. Not many sellers when its hot. Drove by the other day and there were some hard core folks sticking it out. Thanks for all...
[ATTACH] Nothing fancy here. 1956 f head, still 6 volt,
BDS 2.5 springs. New brakes, exhaust and drive it. Damn near rust free.
1965 Jeep cj5
1955 CJ5 Excellent Condition
I believe this is it.
69 Jeep CJ-5 Parts - complete jeep!
Here it is I believe
Jeep Willys MB GPW PCV Valve CJ2A CJ3A CJ5 M38 M38A1 G503 G740 G758 Crankcase | eBay
See pic #5
Hope this helps. Photo from 56 cj6
[ATTACH] Here's an old one, still working
I had one like yours. Had to take break the nut into pieces. Then had to heat the yoke up and tap it till it broke loose from the pinion.
Separate names with a comma.