...but minimal explored territory with Buick 3.8l, chevy 4cyls, mercruiser 4cyl, Ford and chevy v8s, and I'm sure you could get an ecoboost to...
...if spun backwards, in very short order, which is why Merc built reverse rotation only Alphas,..... Mercruiser GM Engine Code Identification,....
I have a 350 Mercruiser Chevy that was originally a reverse-rotation engine. It was one of a pair (cw/ccw pair) that had Alpha outdrives, so...
Ayuh,...... The Mercruiser is either a 153cid, 2.5L,(just a pulley on the crank) 120hp, or a 181cid, 3.0l, (harmonic balancer, 'n pulley)140hp...
...not mounted as a pair in the same boat. I do not think the GM "Mercruiser" 4 cylinder was ever used as a pair with opposed rotation. I don't...
...resolved by answering questions that were never asked Yes, the Mercruiser 4ycl was derived from the 153 Chevy engine, I have owned several...
Ayuh,..... It's not a different head,.... It's a completely different motor,..... The 2.5l motor used in boats is the Chevy pattern motor,...
...in oil. I tried to help find the part, and did look at the Mercruiser stuff but those have an entirely different head on them. The inline 4...
...to 3/8”…I just don't know when yet. I tried the postal LLV route to no avail. I haven't checked in the boat/mercruiser realm yet. Thats next.
...you go with really low gears. You might need to reconsider that Mercruiser 470. They have the same displacement of a Dauntless,( but only 4...
...diesel big block GM/Mopar/Ford Rover V8 SBC SBF SBM 22R 4bt Perkins Pontiac 194 (can't find one) 153 Chevy Mercruiser 4 cylinder variant LS
...5/16" fuel line, an electric fuel pump('cause it was there), a Mercruiser water sep/ fuel filter('bout a pint cap.), 'n a few feet of marine...
...on the typical carburetor pickup then have both feed the mercruiser filter assembly with overflow actively exiting the proposed vent to tank...
...on this project... not able to get out there but here is a mercruiser filter on remote bracket. I would recommend just getting a hot rod fuel...
...waiting for a Jeep project. Its an alloy block/iron head Mercruiser 3.7 liter (about the same as a 225). They claim around 170hp, and they have...
...out the F134 for a completely rebuilt chev 153 (or omc 2.5/ mercruiser 3.0, not completely sure which) its mated to a t90a via a novak GN9 and...
If it has 3 oil galleys plugged on the back of the block it should also have 4 bolt mains. Those are the best production 4.3 blocks since you can...
That's Awesome. Chuck some 33s on there and we'll see you on the Rubicon in July!!! Play some Dead!!
...I scored a free boat on Craigslist that needed too much work make seaworthy. The 4.3 mercruiser was in great shape. Here’s the first start. [MEDIA]
...about 15 years ago ! It was an I/O, with a Chevy 4 cyl. & a Mercruiser stern drive. It worked great. No more mess'n with points. I remember...
Separate names with a comma.