1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Reverse switch bad?

Discussion in 'Early CJ5 and CJ6 Tech' started by cargovoyage, Jan 13, 2011.

  1. Jan 13, 2011
    cargovoyage

    cargovoyage New Member

    Joined:
    Dec 20, 2010
    Messages:
    33
    I'm trying to figure out why the PO has the reverse switch disconnected. I found the reverse switch on top of the T14 case. I put 12 volts to one side and read 2 volts on the other in reverse. Does this mean the switch is shot?
    Thanks
     
  2. Jan 13, 2011
    mainejeep

    mainejeep Member

    kenduskeag maine
    Joined:
    Dec 11, 2010
    Messages:
    226
    could be or only partly engaging u could change it and see. i think napa cna get them for you ... i put a regular toggle switch in mine
     
  3. Jan 13, 2011
    cargovoyage

    cargovoyage New Member

    Joined:
    Dec 20, 2010
    Messages:
    33
    Mine currently has a toggle switch installed, but why wouldn't I want to get the original setup back in order?
     
  4. Jan 13, 2011
    UncleSam

    UncleSam Sponsor

    Cleburne County,...
    Joined:
    Oct 25, 2010
    Messages:
    132

    Yeah sounds like the switch is shot..should read 12v if you've got it in reverse..
     
  5. Jan 13, 2011
    mainejeep

    mainejeep Member

    kenduskeag maine
    Joined:
    Dec 11, 2010
    Messages:
    226
    you most certainly could i didnt realize you already had the toggle switch. were you able to find one?


    was surfing ebay for cj5 stuff and came across this, NOS back up switch figured id give you the link
    http://cgi.ebay.com/ebaymotors/NOS-...tZVintageQ5fCarQ5fTruckQ5fPartsQ5fAccessories
     
    Last edited: Jan 13, 2011
  6. Jan 13, 2011
    cargovoyage

    cargovoyage New Member

    Joined:
    Dec 20, 2010
    Messages:
    33
    Thanks but I can get one at Napa
    Posted via Mobile Device
     
  7. Jan 15, 2011
    cargovoyage

    cargovoyage New Member

    Joined:
    Dec 20, 2010
    Messages:
    33
    Thanks everyone. The NAPA part was plug and play. Works as new now.
     
New Posts