1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

dauntless not running right

Discussion in 'Early CJ5 and CJ6 Tech' started by mainejeep, Dec 20, 2010.

  1. Dec 23, 2010
    mainejeep

    mainejeep Member

    kenduskeag maine
    Joined:
    Dec 11, 2010
    Messages:
    226
    quick update. took the jeep for its first on the road ride ..to the store of course, not far from my home oh and by the way it runs like crap:rofl: but it got me there and back. happy holidays everyone more when i start the rebuild :beer:
     
  2. Dec 27, 2010
    mainejeep

    mainejeep Member

    kenduskeag maine
    Joined:
    Dec 11, 2010
    Messages:
    226
    i have one stupid question for you all. if my jeep back fires through the exhaust. (when im driving more than 5 mph) does this mean my timing is off?
     
  3. Dec 27, 2010
    kaiser_willys

    kaiser_willys Well-Known Member

    Joined:
    Jan 7, 2007
    Messages:
    1,524
    could very well be! i got the cops called on me once in town for gun shots being fired. guess why :oops:
     
  4. Dec 27, 2010
    mainejeep

    mainejeep Member

    kenduskeag maine
    Joined:
    Dec 11, 2010
    Messages:
    226
    R) well i will have to put a timing light on it tommorow and see. does any one know what the timeing should be ?
     
  5. Dec 27, 2010
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Timing or dwell for the points could very well be off. Adjust/replace the points (if equipped) then adjust ignition timing and see where you are at. Point dwell will effect timing but timing will not effect the points. here's a place where a manual or the search function comes into play...:beer:
     
  6. Dec 28, 2010
    mainejeep

    mainejeep Member

    kenduskeag maine
    Joined:
    Dec 11, 2010
    Messages:
    226
    so went to work today was doing some plowing, and all of a sudden the jeep stopped running and had no spark. so i thought it mite be the coil that i had on there. (accel super coil) so i changed it to a universal regular one , still no spark. took the dist cap off and the cam piece on the points broke off. so i ordered on from the flps (surprised they one for a prestolite dist). put the point in and put the adjustment back to where it was, and no start.. could this be the condenser too would something like this go at the same time?

    ,
     
  7. Dec 28, 2010
    kaiser_willys

    kaiser_willys Well-Known Member

    Joined:
    Jan 7, 2007
    Messages:
    1,524
    this may seem like a dumb question, but it has happened before :rofl: did you set the gap with the lobe in a "open position" or closed (flat spot) if you set it on a flat spot they will "never" close to produce a spark. and yes a bad condensor will cause no spark................................................... damn i am getting old, being knowledgeable about points :oops:
     
  8. Dec 28, 2010
    mainejeep

    mainejeep Member

    kenduskeag maine
    Joined:
    Dec 11, 2010
    Messages:
    226
    i set it to how it was when i took it off. it was on the round side in the open position that i set it .. when i put the new one back in i just noted where the position of the adj. screw was. but i didnt turn the engine over to see if it closed or not guess i should have.. but it was also getting dark when i got it back together. im trying to find in the manual what the gap should be, but im having a hard time finding it.
     
  9. Dec 28, 2010
    chuck123wapati

    chuck123wapati Member

    wyoming
    Joined:
    Jun 18, 2008
    Messages:
    761
    sounds like you might have lost the timing gear. sometimes they will jump a tooth and backfire and such then shear all the teeth if they are the old non metal type gears.
     
  10. Dec 28, 2010
    mainejeep

    mainejeep Member

    kenduskeag maine
    Joined:
    Dec 11, 2010
    Messages:
    226
    no i know i didnt lose the timing gear because i put a coil pack on the jeep, which bypasses the points, condenser , and coil among other things and the jeep fired rite up. this is how i figured it was the coil at first.
     
  11. Dec 29, 2010
    mainejeep

    mainejeep Member

    kenduskeag maine
    Joined:
    Dec 11, 2010
    Messages:
    226
    UEREKA I HAVE DONE IT. i changed the the point and condenser today, gapped the point to .011. ( the only feeler guage i had close enuf) jeep fired rite up and runs great the best it has ever ran. besides a slight hesitation when getting on the gas and letting off. i was so excited to took it for a ride into town, the farthest it has gone yet and didnt have any problems what so ever. i belive the po had the last set of points adjusted to far out. could be why it started so hard all the time. thank you everyone very much for the help. this site is so helpful.... happy jeeping :driving: :tea:
     
  12. Dec 29, 2010
    kaiser_willys

    kaiser_willys Well-Known Member

    Joined:
    Jan 7, 2007
    Messages:
    1,524
    my book calls for.016 gap. thats for a 1966 225 in a buick. funny thing my book covers jeep as well but does not have a listing for the 225. every jeep engine it list from 1966-1973 calls for .016 as well
     
  13. Dec 29, 2010
    chuck123wapati

    chuck123wapati Member

    wyoming
    Joined:
    Jun 18, 2008
    Messages:
    761
    awesome have mucho funo
     
  14. Dec 29, 2010
    mainejeep

    mainejeep Member

    kenduskeag maine
    Joined:
    Dec 11, 2010
    Messages:
    226
    yes my book said the same thing but .011 was the only feeler guage i had that was close. so i compensated a little bit with the feel on the guage. and the book also mentions if anything you should gap a little tight, to account for the points wearing. if i can get my hands on a dwell meter then i will chack and make shure it is withing specs and fine tune :)
     
New Posts