1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Where can I find....

Discussion in 'Early CJ5 and CJ6 Tech' started by mruta, Aug 28, 2004.

  1. Aug 28, 2004
    mruta

    mruta I drank with Billy!

    Downers Grove, IL
    Joined:
    Sep 22, 2002
    Messages:
    422
    Can anyone tell me where I can find the little bracket which attaches the end of the steering column to the firewall found in this pic? Please don't tell me I have to buy this Jeep to get the part I'm looking for either! :D

    [​IMG]

    I wish I could afford that Jeep!

    Thanks

    mruta
     
    mruta, Aug 28, 2004
    #1
  2. Aug 28, 2004
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,538
    If thats a Jeep part, try http://www.jwjeep.com/ The Jeep engine compartment looks pretty sweet, but why would you go to all that work and then put in an unpainted radiator?
     
    Posimoto, Aug 28, 2004
    #2
  3. Aug 28, 2004
    jeepngem

    jeepngem New Member

    Riverside,...
    Joined:
    Aug 16, 2003
    Messages:
    47
    mruta: Not sure what year the Jeep is that you're looking at.....BUT....if it is 76 and later the bracket is as follows: J3196870 upper and J3196897 lower....NOW if it is 72-75 then it will be J0999559 upper and J 5351247 lower. Good Luck!! Glenn
     
    jeepngem, Aug 28, 2004
    #3
  4. Aug 28, 2004
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    I would just pay the money and get a flaming river ujoint end. they have nice couplers, you can get the whole kit and cabootle there, kind of $$ but sure is nice quality parts.

    i think it was flamingriver.com
     
    DanStew, Aug 28, 2004
    #4
  5. Aug 31, 2004
    mruta

    mruta I drank with Billy!

    Downers Grove, IL
    Joined:
    Sep 22, 2002
    Messages:
    422
    Glenn, thanks for the part numbers! Dan, I've already got the u joint and you're right, flaming river does have nice stuff. I just wish I could afford it! I'd love to have a brand new tilt steering column in there too!

    mruta
     
    mruta, Aug 31, 2004
    #5
  6. Aug 31, 2004
    James P. Enderwies

    James P. Enderwies Sponsor

    Lake Havasu City, AZ
    Joined:
    Feb 2, 2003
    Messages:
    747
    Mruta: I just "bit the bullit" and had a new Flaming River tilt shaft installed. Gerry, my Hot Rod Builder friend, put it in thinking that I would not be happy with a new GM tilt which is what I had. We origonally contracted for a new GM tilt, but I'm glad he did it. Cost about 45-50 bucks more, won't wear out in the tilt, and uses GM turn signal mechanisms (can get at any FLAPS).

    He also used a Flaming River neddle bearing joint at the top and a Borgeson on the bottom (looks the same as FR but not as polished as much).

    Sometimes it's better to "blow your wad" and get the best. :)
     
    James P. Enderwies, Aug 31, 2004
    #6
New Posts