1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

CJ3A Need Dimensions

Discussion in 'Flat Fender Tech' started by DanStew, Jun 7, 2008.

  1. Jun 7, 2008
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    Anyone with a stock CJ3a, can you give me the dimensions of the little hoop that holds the vent open on the windshield frame? I am going to make one for my jeep, just need to know the size.

    Thanks!!
     
  2. Jun 8, 2008
    mel

    mel New Member

    Joined:
    May 29, 2007
    Messages:
    44
    Cant say mine is stock for sure (not much else on it is:)), but it just looks like a piece of thick wire/bar bent into a V shape, about 3'' deep and around 1'' wide at the top. The vent hooks onto the lower part of the V.
     
  3. Jun 9, 2008
    HOGHEAD

    HOGHEAD Made in the U S A

    Sharpsburg
    Joined:
    Sep 29, 2006
    Messages:
    45
    :(Wish my 59 had a vent ,,, Must have been a option ,,,:cry:
     
New Posts