1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

U-Joints ##

Discussion in 'Early CJ5 and CJ6 Tech' started by 1963cj5, Jan 14, 2008.

  1. Jan 14, 2008
    1963cj5

    1963cj5 Member

    N.C.
    Joined:
    Jan 15, 2006
    Messages:
    307
    Cant seem to find any listing for u-joints for a pto shaft for my 61 with the winch..The local idiots wont open a book and look , if its not in the computer I dont know what to tell you..they have no idea what a micrometer is to measure them and no clue as to match anything up..
    Any help or part numbers would keep me from making a drive through at the auto parts store would be greatly appreciated ..thanks in advance....:)
     
  2. Jan 14, 2008
    WYOMIKE

    WYOMIKE Oct 1971 pic

    Parkman, Wyoming
    Joined:
    Jan 22, 2003
    Messages:
    685
    Here is what I have on my Koening
    Front 7/8"-1/4"KW x 7/8"-3/16"KW
    Center 7/8"-1/4"KW x 7/8"-1/4KW
    Rear 7/8"-1/4"KW x 1"-1/4"KW
    This is what is in the manual for a mod 151J, 150J, and 158J and mod.s' 50 and 51 PTO unit.
    Do you know for sure what mod winch and PTO you have? Some of them are different.
    What I did was to go to a tractor repair shop in in town with the PTO shaft and they fixed me right up with the u joints.
    Hope this helps.
    Mike
     
  3. Jan 15, 2008
    1963cj5

    1963cj5 Member

    N.C.
    Joined:
    Jan 15, 2006
    Messages:
    307
    Dont have a clue as to what model I got..no numbers at all.

    Appreciate the measurements and idea for the tractor shop...
     
  4. Jan 15, 2008
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    Tractor shop would be best bet, they at least have books. And are probably willing to look through them.
     
New Posts