1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Carb Question

Discussion in 'Early CJ5 and CJ6 Tech' started by 64_CJ5, Jun 12, 2006.

  1. Jun 12, 2006
    64_CJ5

    64_CJ5 Build it not Buy It!!

    Western, Pa
    Joined:
    May 5, 2006
    Messages:
    33
    Would a HOLLEY Model # 2211C / 2-barrel Carb work on an O.F. 225? or would I need an adaptor of some sort it was off of a 78 El Camino ci V8.
    or would a rochester 2 bbl work better. Thank you in advance.
     
  2. Jun 12, 2006
    James P. Enderwies

    James P. Enderwies Sponsor

    Lake Havasu City, AZ
    Joined:
    Feb 2, 2003
    Messages:
    747
    The good 'ol 2G will always work, but the Holly 2100 with a few mods is a good carb. Yes, you will need an adaptor.
     
  3. Jun 12, 2006
    64_CJ5

    64_CJ5 Build it not Buy It!!

    Western, Pa
    Joined:
    May 5, 2006
    Messages:
    33
    for the holly would I need to change the manifold or just an adaptor to go from a 2 to 4 barrell? if so where would I find that at thank you in advance
     
  4. Jun 12, 2006
    James P. Enderwies

    James P. Enderwies Sponsor

    Lake Havasu City, AZ
    Joined:
    Feb 2, 2003
    Messages:
    747
    If you have a 4bbl manifold on the 225 probably would be best to replace with a 2 bbl manifold for the 2bbl Holly. If your manifold is the stock 225 one, you just need an adaptor for the correct bolt pattern for the Holly. You can get these from Summit.
     
New Posts