1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

D20 Shift Lever Bushings

Discussion in 'Intermediate CJ-5/6/7/8' started by Torquemaster, May 23, 2006.

  1. May 23, 2006
    Torquemaster

    Torquemaster Tough on Jeeps

    Southwest New...
    Joined:
    Apr 8, 2006
    Messages:
    26
    I am still putting back together my T15 and D20 from the carnage a few weeks ago. While I had it on the bench I was going to replace the shift linkage bushings. They are copper and have the diamond pattern on the ID. These are really worn and my lever is extremely loose. I was intending to make my own but I thought they can't be very expensive but I can't find them anywhere. Does anybody have a part number or where to get them?
     
  2. May 23, 2006
    Mongo

    Mongo Shadetree Moronic

    Fort Lauderdale
    Joined:
    Nov 12, 2005
    Messages:
    132
    email the guy who runs http://www.broncograveyard.com/ and ask if he has any. He has EVERYTHING for the D20, it looks like. If not, I just bought a twin stick conversion from a guy on eBay (he makes them). He might have them if you want me to get you his eBay store name.
     
  3. May 23, 2006
    Torquemaster

    Torquemaster Tough on Jeeps

    Southwest New...
    Joined:
    Apr 8, 2006
    Messages:
    26
    I called down to Bronco grave yard and they don't have any. They had me call Crown Automotive and they don't have any either. I will give the guy that made your twin stick a try and if he doesn't have any I am headed off to the lathe. Maybe I'll make a couple extras if anybody else needs some.
     
  4. May 23, 2006
    Mongo

    Mongo Shadetree Moronic

    Fort Lauderdale
    Joined:
    Nov 12, 2005
    Messages:
    132
  5. May 23, 2006
    TheBeav1955

    TheBeav1955 Member

    Wyoming, Mi
    Joined:
    Apr 14, 2004
    Messages:
    296
    I might be interested if you find some or make them mine are shot as well
     
  6. May 24, 2006
    iamgeer

    iamgeer Member

    Calgary,...
    Joined:
    Jan 30, 2004
    Messages:
    226
    Dont know haw bad you wanna be stock, but I used little heim joints instead on mine. Works great.

    karl
     
New Posts