1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Wheels

Discussion in 'Early CJ5 and CJ6 Tech' started by jeepstar, May 1, 2023.

  1. May 3, 2023
    OzFin

    OzFin Vintage Jeep Guy

    Michigan
    Joined:
    Jul 16, 2007
    Messages:
    945
    jeepstar likes this.
  2. May 3, 2023
    vtxtasy

    vtxtasy oldbee 2024 Sponsor 2023 Sponsor

    Tucson, AZ
    Joined:
    Feb 5, 2006
    Messages:
    1,458
  3. May 4, 2023
    Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Northern California
    Joined:
    Sep 6, 2014
    Messages:
    3,562
  4. May 4, 2023
    jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sheboygan
    Joined:
    Jun 28, 2006
    Messages:
    2,770
    really? I thought they were equivalent to 31's. thought i heard that on here.
    the 33's I put on there has reduced my top speed too much to be enjoyable.

    I'm a dirt/gravel road kinda guy and also pavement to and from work and errands around town. no serious terrain or obstacles in my future.
     
  5. May 4, 2023
    Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Northern California
    Joined:
    Sep 6, 2014
    Messages:
    3,562
    It technically specs out at 28.88", but in real life it will not be that tall.
     
  6. May 4, 2023
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Bozeman, MT
    Joined:
    Jul 18, 2013
    Messages:
    5,629
    I still run 15" rims on both the cj and the wagon....to some extent, what wheel size you want is based on what tire size you want to run. The biggest issues with 15" rims is if you want a tall skinny tire. The Typical 75 profile (like in a 235/75/15) means that you have to get pretty wide to get pretty tall. A lot of us run 33x10.5, but the selection is a bit limited. Even in the 31" range, you still are often around 10.5" wide. But if you are not looking for a tall tire skinny, I don't see why you would spend to go with a 16" rim, unless you just like the look of it. If you are good with 10.5" wide, then the 31s mentioned by Norcal are plentiful in options, and if you want a bit smaller, I run 30x9.5 (or in p-rating, 245/75/15) on the wagon on 15" rims - lots of options there as well.

    For my usage, the 16" rim is intriguing to be able to run either a 215/85/16 or 235/85/16....this gives the old school tall skinny look, but options are a bit limited and often are heavy ply rating. The narrow width does help with some weight gain (assuming light rims), and the narrow/small tire patch may add back a small amount of pep to the jeep, but ride quality might not be great.
     
    Norcal69 likes this.
  7. May 4, 2023
    Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    5,689
    My '69 has a V6, T-14, 3.73s and no overdrive with 31x10.50x15 tires. It goes down the highway at 60+ mph with no issues. They look good with a 2.5" lift plus the wheels I mentioned earlier, and the tires are inside the fenders. The tires just barely rub the springs at full lock.

    [​IMG]
     
    fhoehle, vtxtasy, 1947cj2a and 2 others like this.
  8. May 4, 2023
    kenb

    kenb Cleverly disguised as a responsible adult

    Detroit
    Joined:
    Jan 22, 2019
    Messages:
    677
  9. May 4, 2023
    jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sheboygan
    Joined:
    Jun 28, 2006
    Messages:
    2,770
    i didnt mention that i do prefer the tall skinny tires. my poor little 134 engine thanks me.
     
  10. May 4, 2023
    jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sheboygan
    Joined:
    Jun 28, 2006
    Messages:
    2,770
  11. May 4, 2023
    Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    5,689
    If that's the case, 16 inch wheels are probably a better option. My '68 came with 16x7 'Soft 8' wheels and LT235/85R16 tires. They are about 32" tall. As Finocj noted, tires in this size tend to be high load range and may not ride as soft. It's basically a 3/4 ton pickup size.

    [​IMG]

    [​IMG]

    The wheels are available on Summit but like everything else have gotten more expensive than they used to be: https://www.summitracing.com/parts/crr-3977755
     
    Twin2, vtxtasy and FinoCJ like this.
  12. May 4, 2023
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Bozeman, MT
    Joined:
    Jul 18, 2013
    Messages:
    5,629
    What is on your rig now that you don't like....33x10.5? I am not sure dropping to a 32x10 is going to help the F134 a lot....

    agree with Roy....this is where the 16" rims help...a 235/85/16 gets you almost a 32x9.5 - thats my goal for the wagon one day, but I need the rims and some leaf springs!
     
  13. May 4, 2023
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Bozeman, MT
    Joined:
    Jul 18, 2013
    Messages:
    5,629
    I love that tire size 'look' - but after watching Dave's ecj5 on old BFG 33x9.5, and even comparing 33x10.5 to 33x12.5, you give up some off-road performance going skinny. Especially with the heavy load ply rating - its hard to get them to air down enough to bulge along the sidewall. Heck, with beadlocks and a light cj - you could probably just take the valve stem out and call it good.
     
    fhoehle likes this.
  14. May 4, 2023
    jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sheboygan
    Joined:
    Jun 28, 2006
    Messages:
    2,770
    I could do 60 no problem all day with the 235/75r15s. When I sold the wife's jeep I swapped out those tires for the new 33x12.5r15s that were on her jeep. Cruising around I noticed my top end was suffering lots.
     
  15. May 8, 2023
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,188
    I keep F134 Jeeps with 4.27 axles limited to no taller than 29”-30” tall. You might be able to pull 32”s if you are running 5.38 gears.
    -Donny
     
  16. May 12, 2023
    jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sheboygan
    Joined:
    Jun 28, 2006
    Messages:
    2,770
    I dug these wheels out from the corner of my shed. Your thoughts? Not sold on white, but not sure what goes with orange either.
    Figure use these to save up until I get what I want, some nice aluminum wheels

    Resized_Resized_20230512_095658(1).jpeg
     
    Twin2, FinoCJ and Fireball like this.
  17. May 12, 2023
    Jw60

    Jw60 Cool school 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sedalia MO.
    Joined:
    Apr 8, 2008
    Messages:
    4,793
    There is a song...
    Paint it black.
     
    Fireball likes this.
  18. May 12, 2023
    colojeepguy

    colojeepguy Colorado Springs

    At the foot of...
    Joined:
    Apr 4, 2010
    Messages:
    7,158
    :n:
    Keep 'em white. Old school cool!
     
    Twin2 and Sierra Bum like this.
  19. May 12, 2023
    Sierra Bum

    Sierra Bum Member

    The High Sierra
    Joined:
    Oct 23, 2017
    Messages:
    329
    I like em’. Classic, durable, rugged, steel utility wheel that takes abuse. I always liked the wagon wheels. Like a fool I gave a set of 15x8’s away a few years ago… they even had the stem holes on inside of the rim (protected from rubbing).
     
  20. May 12, 2023
    Cj5dale

    Cj5dale Member 2023 Sponsor 2022 Sponsor

    Knoxville, Tn
    Joined:
    Aug 19, 2021
    Messages:
    576
    I like those wheels..

    upload_2023-5-12_22-50-54.jpeg
     
    jeepstar, Twin2 and vtxtasy like this.
New Posts