1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Muzikp's Sometimes Driveable Build

Discussion in 'Builds and Fabricators Forum' started by Muzikp, Aug 11, 2017.

  1. Aug 8, 2022
    45es

    45es Active Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Naches, WA
    Joined:
    Mar 31, 2007
    Messages:
    1,103
    I don't know the brand of muffler you bought but you could look at something like Walker mufflers. The one listed for your jeep for example is the same shape as the ones you purchased but are only 17.5" long. Looking at other brands will give more options.
     
    Norcal69 and Muzikp like this.
  2. Aug 8, 2022
    Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Northern California
    Joined:
    Sep 6, 2014
    Messages:
    3,549
    I ran dual Walker quiet flows when I had fender well headers. Now that I have novak headers I run a single Walker quiet flow ss. It is very quiet.
    You might be best served by a 2 into 1 single tail pipe setup.
     
    FinoCJ and Muzikp like this.
  3. Aug 8, 2022
    Muzikp

    Muzikp Active Member

    Sacramento Ca.
    Joined:
    Sep 27, 2016
    Messages:
    1,450
    The long version I bought is a Walker quiet flow and that side definitely sounds better than the random 2 chamber FLAPS one I bought, looking back I should have bought the shorter walker. I like ITLKSEZ idea of going to a junkyard and finding a couple mufflers off a modern car that would fit, guessing those are going to be the quietest thing out there. The mistake I'm making right now is trying to get this done quick for the upcoming Deer Valley trip, I never do my best work when I'm trying to rush for a deadline. It means I'm going to have to revisit this at a later date :cry:.
     
    45es and Fireball like this.
  4. Aug 8, 2022
    Muzikp

    Muzikp Active Member

    Sacramento Ca.
    Joined:
    Sep 27, 2016
    Messages:
    1,450
    Where is your cross over? Want to keep everything above frame rails if possible.
     
  5. Aug 8, 2022
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Bozeman, MT
    Joined:
    Jul 18, 2013
    Messages:
    5,593
    I don't have the big 4 speed trans, but I also run a 2 into 1 set up with the crossover tucked up just in front of the trans and above the skid plate. Granted the size of the T14 gives more room... we'll see what happens if I ever get the t18 in there. I run dual system on the 58 because the sm465 is huge making crossover in front of it more difficult, and with the longer wheelbase and widening frame rails it works nicely. It's worth the effort to get it right...replacing glass packs with quiet mufflers are some of the best mods I've done, even when paying for some shop work with pipe bending.
     
    Last edited: Aug 8, 2022
    Muzikp likes this.
  6. Aug 8, 2022
    Muzikp

    Muzikp Active Member

    Sacramento Ca.
    Joined:
    Sep 27, 2016
    Messages:
    1,450
    I was just laying under it looking where a cross over could go, the SM420 is huge. I want to stick with the dual and have a shop do some bending and get it right. It takes too much out of me to do it myself and I'm not great at it.
     
  7. Aug 8, 2022
    Jeepsterjim

    Jeepsterjim Member

    Lincoln, CA
    Joined:
    Apr 25, 2019
    Messages:
    401
    When I had my V6 and SM420/20X-xfer setup, I ran dual pipes clear to the back corners and had the pipes run along the inside of the frame rails. I installed the crossover behind the X-fer case. Used 1 3/4" pipe for each side and 1 1/4" pipe for the crossover. Designed the crossover so it could be unbolted thus giving easy access to the trans/xfer area. Worked out great.
     
  8. Aug 8, 2022
    Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Northern California
    Joined:
    Sep 6, 2014
    Messages:
    3,549
    My setup is a little different because I have Novak Headers.
    It crosses from the left to the right in front of the oil pan.

    [​IMG]
     
    givemethewillys, Muzikp and FinoCJ like this.
  9. Aug 8, 2022
    Jeepsterjim

    Jeepsterjim Member

    Lincoln, CA
    Joined:
    Apr 25, 2019
    Messages:
    401
    NORCAL69
    Regarding your headers, did you have any clearance issue's with them? Such as Sag steering?
    Thanks, Jim
     
  10. Aug 8, 2022
    scott milliner

    scott milliner Master Fabricator

    Seattle Wa.
    Joined:
    Dec 17, 2002
    Messages:
    2,361
    I run a single exhaust. The cross over is behind the transfer case.
     
New Posts