1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

M38 Glovebox

Discussion in 'Flat Fender Tech' started by DanStew, Jan 7, 2022.

  1. Jan 7, 2022
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,584
    I have looked around and I have never found the inside for the small glovebox on an M38. Does anyone have a picture of what it looks like so i could maybe bend something up to work?
     
  2. Jan 8, 2022
    52M38-73CJ5

    52M38-73CJ5 Member

    Wenatchee WA
    Joined:
    Nov 11, 2020
    Messages:
    154
    Here is the bottom
    upload_2022-1-7_21-14-28.jpeg
    The left side. rectangular part on top of pile.
    upload_2022-1-7_21-14-57.jpeg
    And a better photo of the bottom.
    upload_2022-1-7_21-25-16.png
     
    Last edited: Jan 8, 2022
  3. Jan 9, 2022
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,584
    Interesting . so the glovebox is actually 4 separate pieces bolted together.
     
  4. Jan 10, 2022
    52M38-73CJ5

    52M38-73CJ5 Member

    Wenatchee WA
    Joined:
    Nov 11, 2020
    Messages:
    154
    It is actually 3 pcs.
    Door
    L side
    Bottom
    Top back and right side are cowl and firewall
    So I guess it is four.
     
  5. Jan 13, 2022
    Mrmotorhead

    Mrmotorhead New Member

    wyoming
    Joined:
    Oct 9, 2021
    Messages:
    10
    I have a m38A i am scrapping out, i think all of the glove box is still on it.
     
  6. Jan 17, 2022
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,584
    So I was going through a box of some parts from the jeep that i put aside for assembly later on. Low and behold i have both of those panels. i did not know what they were, they just came with the M38 tub. so now i need to paint then and figure out what size bolts they need to assemble on the left side.
     
    52M38-73CJ5 likes this.
New Posts