1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Steering Column Dash Mount Help

Discussion in 'Early CJ5 and CJ6 Tech' started by Play Dead, Nov 18, 2021.

  1. Nov 18, 2021
    Play Dead

    Play Dead New Member

    Oceano, CA
    Joined:
    Aug 18, 2020
    Messages:
    47
    I have a 71 cj5 that I am converting to Saginaw power steering. My most recent issue is figuring out how to mount my 2” diameter flaming river column to the dash. The column will need to move ~ 3” up from its stock location in order for clearance around exhaust, u-joint angles and room in the lap. I don’t mind cutting the original dash as bubba has put so many holes it should really be replaced or a skin laid over. The column was free to me and I’d really like to use it as I have already bought the wiring harness and gm style connections for blinkers, ignition etc. Any ideas or photos would be greatly appreciated. I have used this sites search feature as well as 3 other search engines with no luck.
     
  2. Nov 18, 2021
    Play Dead

    Play Dead New Member

    Oceano, CA
    Joined:
    Aug 18, 2020
    Messages:
    47
    Jeep has 11” drums at 4 corners and a slick clutch linkage (the only good thing bubba did) I have made a throttle linkage and pedal so hanging pedals isn’t something I’d like to tackle just yet.
     
  3. Nov 18, 2021
    EDDY ARNOLD

    EDDY ARNOLD Member

    71655
    Joined:
    Apr 6, 2021
    Messages:
    76
    Look up cayenne saginaw conversion nov 2019 good write up and pics.
    Just completing mine and left stock dash mount location
     
    Play Dead likes this.
  4. Nov 21, 2021
    Steve's 70-5

    Steve's 70-5 Active Member

    Louisville, Ky
    Joined:
    Nov 12, 2009
    Messages:
    1,381
    When I put my Flaming River column in, I used the original Jeep clamp at the bottom of the dash
     
    dnb71R2 likes this.
  5. Nov 23, 2021
    BadGoat

    BadGoat How High Can You Climb?

    Northern Virginia
    Joined:
    Apr 27, 2017
    Messages:
    326
    If you need to move it up, look at picking up or duplicating a later dash. They are already set up for the column going through the dash instead of under it like the early CJ5s.
     
    Play Dead likes this.
  6. Nov 24, 2021
    colojeepguy

    colojeepguy Colorado Springs

    At the foot of...
    Joined:
    Apr 4, 2010
    Messages:
    7,110
    Those also use a large metal flange to mount it to the dash, which is welded to the steering column.
     
  7. Nov 24, 2021
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,170
    What the two above posts suggest, find an intermediate ('72-'75) dash and copy the horseshoe collar on the column.
    -Donny
     
  8. Nov 24, 2021
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,407
    my buddy used the column and mount from a postal jeep
    modified dash to fit
    CAM00525.jpg
     
    Play Dead likes this.
New Posts