1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dauntless Engine Mount

Discussion in 'Early CJ5 and CJ6 Tech' started by kenb, Aug 24, 2021.

  1. Aug 24, 2021
    kenb

    kenb Cleverly disguised as a responsible adult

    Detroit
    Joined:
    Jan 22, 2019
    Messages:
    670
    Does this look like a factory installed mount? I'm unsure if I'm dealing with an adapted 4F frame or if this is a factory V6 frame. I'm accustomed to seeing the Hurricane mounts rivited to the frame so I was surprised to see weld.
    Thanks
    0_IMG-20210824-WA0005.jpg
     
  2. Aug 24, 2021
    Rich M.

    Rich M. Shoe salesman 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Maryland
    Joined:
    Mar 23, 2008
    Messages:
    2,169
    Looks like a factory mount. Welds a little rougher than factory, may be a factory mount transplanted
     
    jpflat2a likes this.
  3. Aug 24, 2021
    SoCalNickG

    SoCalNickG Member 2023 Sponsor 2022 Sponsor

    Whittier, CA.
    Joined:
    Mar 17, 2017
    Messages:
    347
    In the 70's I purchased the OEM V6 mounts from a Jeep dealer and used them to swap a 231 odfire into my 64 CJ5.
    Installed they looked just like that.
     
  4. Aug 24, 2021
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Are the originals welded across the rail? I thought that was a bad idea. Parallel with the rail is good. Though I've seen some poor quality Jeep factory welds, looks Shadetree to me.
     
  5. Aug 24, 2021
    Cj5dale

    Cj5dale Member 2023 Sponsor 2022 Sponsor

    Knoxville, Tn
    Joined:
    Aug 19, 2021
    Messages:
    573
    Here’s what my engine mount looks like on 1970 cj5 with dauntless. Not sure if that’s factory or not though.

    upload_2021-8-24_17-35-10.jpeg
     
  6. Aug 24, 2021
    EFranzen

    EFranzen Member

    Queen Creek AZ
    Joined:
    Nov 5, 2020
    Messages:
    54
    1969 CJ5. The edges on yours look like have been cut off a different frame and then welded.

    upload_2021-8-24_17-32-17.png
     
New Posts