1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Cj2a Frame Stretch. What Size Tubing?

Discussion in 'Builds and Fabricators Forum' started by DanStew, Jan 11, 2021.

  1. Jan 11, 2021
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    Is there a size of rectangular tubing that fits in the channel without a gap?

    thanks!
     
  2. Jan 11, 2021
    73 cj5

    73 cj5 Not ready for the junkyard yet

    Clinton, Mississippi
    Joined:
    Jan 10, 2014
    Messages:
    2,137
    2x4? I used 2x3 and it fit the frame horns.
     
    DanStew likes this.
  3. Jan 11, 2021
    Jw60

    Jw60 Sitting up n buckled down. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sedalia MO.
    Joined:
    Apr 8, 2008
    Messages:
    4,716
    There are places locally here that can make any channel you need as long as it is no deeper than it is wide.

    Otherwise it may be danstew's cut'n'weld express
     
  4. Jan 11, 2021
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,798
    I originally stretched mine with some scrap "other" frame, fishplate and strap top and bottom. Its just about as easy to make a whole new frame outta 2x4x3/16. Makes it super easy to add wrangler springs or whatever you like.
     
    fhoehle likes this.
  5. Jan 12, 2021
    Mr Vaughan

    Mr Vaughan

    i would do this. it would be a lot more solid, and hve more options that could be built in.
     
    fhoehle and DanStew like this.
  6. Jan 13, 2021
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    I am on the fence to do it that way. It will depend on what my frame condition will be once i tear it apart. After doing the frame for my rover our of 2x5 tubing, it is not that hard, but if the frame is good still it will will help me out by having the body mounting positions already done :)
     
    47v6 likes this.
  7. Jan 13, 2021
    Bigdaddy13

    Bigdaddy13 Member

    So.Cal
    Joined:
    Nov 19, 2019
    Messages:
    556
    I have nothing useful to add, but there was a dirt everyday episode that just went over stretching a YJ frame for Fred's red wagon.

    Dave is a pretty accomplished fabricator - i was impressed.
     
  8. Jan 13, 2021
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,798
    How is that running and driving?
     
  9. Jan 13, 2021
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    It runs and drives great. it sort of has been neglected a bit, but i try to get it out on weekends. i had it up to 70mph no problem on the interstate last month. I am going to swap motors when put a gasket kit in another 4.3 i got. the one in it is extremely high miles and leaking oil good.
     
    fhoehle, ITLKSEZ and 47v6 like this.
  10. Jan 15, 2021
    fhoehle

    fhoehle Sponsor

    Harford Township, PA
    Joined:
    Apr 11, 2012
    Messages:
    1,427
    I am a fan of the complete frame build. If you tie in the rigid box section to the light open channel, even with fishmouth transitions, it runs the risk of cracking, in my opinion. I go completely overboard on frames though, because I realize that I am like a gorilla with things and I don't have any finesse, so I would take my advice with a grain of salt. After seeing your other work, I am sure you will pick the right balance and have a great build for us to watch.
     
    47v6 likes this.
  11. Jan 15, 2021
    Jw60

    Jw60 Sitting up n buckled down. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sedalia MO.
    Joined:
    Apr 8, 2008
    Messages:
    4,716
    I forgot the 2a had a lighter frame than a 5.
    With frame building experience that is the way to go.
     
New Posts