1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Rocker Oil

Discussion in 'Early CJ5 and CJ6 Tech' started by 3b a runnin, Sep 1, 2020.

  1. Sep 1, 2020
    3b a runnin

    3b a runnin Active Member 2023 Sponsor 2022 Sponsor

    virginia
    Joined:
    Jan 11, 2015
    Messages:
    1,295
    Is this normal to only get oil out of the front rocker stand for a 225 Dauntless? Both sides are this way.
    [​IMG]
    I'm barely turning the drill at this point.
     
    3b a runnin, Sep 1, 2020
    #1
  2. Sep 1, 2020
    Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    cordele, Ga.
    Joined:
    Mar 29, 2007
    Messages:
    5,922
    That is it. Only the two holes, one each side at front of block. That is why it is critical that you get the rocker shafts oriented correctly.
     
    Walt Couch, Sep 1, 2020
    #2
    3b a runnin likes this.
  3. Sep 1, 2020
    3b a runnin

    3b a runnin Active Member 2023 Sponsor 2022 Sponsor

    virginia
    Joined:
    Jan 11, 2015
    Messages:
    1,295
    Thanks Walt
     
    3b a runnin, Sep 1, 2020
    #3
  4. Sep 1, 2020
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,183
    In theory, the whole hollow rocker shaft gets pressurized from the one rocker stand on each head. Thats what lubricates all the rockers and pushrods up top. What you are seeing look fine.
    -Donny
     
    Keys5a, Sep 1, 2020
    #4
    3b a runnin likes this.
  5. Sep 2, 2020
    3b a runnin

    3b a runnin Active Member 2023 Sponsor 2022 Sponsor

    virginia
    Joined:
    Jan 11, 2015
    Messages:
    1,295
    Thanks Donny
    I cleaned up the rockers and shafts and now have plenty of oil coming out by the little cutouts (not sure the proper name) near each stand.
    Thanks again guys
     
    3b a runnin, Sep 2, 2020
    #5
  6. Sep 6, 2020
    3b a runnin

    3b a runnin Active Member 2023 Sponsor 2022 Sponsor

    virginia
    Joined:
    Jan 11, 2015
    Messages:
    1,295
    CRAP! Just found out my intake man wont fit. Must be for a 231, or evenfire. Bout a 1/4in difference in width.
    [​IMG]
    [​IMG]
    [​IMG]
    Its's too narrow!
    It's for sale
     
    3b a runnin, Sep 6, 2020
    #6
  7. Sep 6, 2020
    Rich M.

    Rich M. Shoe salesman 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Maryland
    Joined:
    Mar 23, 2008
    Messages:
    2,182
    What? Pm sent
     
    Rich M., Sep 6, 2020
    #7
New Posts