1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

How To Remove E-brake Drum On Dana 18

Discussion in 'Early CJ5 and CJ6 Tech' started by Big_Rob2020, Aug 6, 2020.

  1. Aug 6, 2020
    Big_Rob2020

    Big_Rob2020 Member

    New Braunfels, TX
    Joined:
    Jul 29, 2020
    Messages:
    80
    Hey guys, I'm sure one of you knows this. Is there a trick or technique to pulling the E-brake drum cover off of the output shaft on the Dana 18 T-case. I'm about to get into a rebuild here and I can't seem to get any of my pullers to work for this application. Any help is appreciated
     
    Big_Rob2020, Aug 6, 2020
    #1
  2. Aug 6, 2020
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,419
    I've always just used my small two jaw puller under two of the ears on yoke
     
    Twin2, Aug 6, 2020
    #2
  3. Aug 6, 2020
    iharding

    iharding Quitter

    Tacoma, WA
    Joined:
    Feb 24, 2013
    Messages:
    356
    I use a steering wheel puller on the yoke. It's kind of a funny arrangement how it's behind the yoke but it works. The bolt heads are held steady by a groove they sit in.
     
    iharding, Aug 6, 2020
    #3
  4. Aug 6, 2020
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    I remember it being a chore but don't remember exactly how it all came off. Mine was so crusty is was unusable.
     
    Jrobz23, Aug 6, 2020
    #4
New Posts