1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

2" Springs On 2.5" Axel Pads??

Discussion in 'Builds and Fabricators Forum' started by Jay's WWII Jeeps, Apr 29, 2020.

  1. Apr 29, 2020
    Jay's WWII Jeeps

    Jay's WWII Jeeps Member

    Napa CA
    Joined:
    Mar 14, 2018
    Messages:
    166
    Can I run 2' springs on an axel that has 2.5" pads on it?
    Thanks
    Jay
     
  2. Apr 29, 2020
    Lilbuff63

    Lilbuff63 Member 2022 Sponsor

    Sonoma County Ca
    Joined:
    Jan 12, 2014
    Messages:
    285
    I put 2.5” springs on 2” pads but not sure about the other way around. You would have to have 2.5” u-bolt plates as well to clear the pads leaving a gap between the u-bolts and springs, not sure if that would cause any weird twisting of the springs? Hopefully someone with more knowledge will chime in!
     
  3. Apr 29, 2020
    fhoehle

    fhoehle Sponsor

    Harford Township, PA
    Joined:
    Apr 11, 2012
    Messages:
    1,427
    Just make sure the Ubolt plates are strong, as the holes will be spaced out from the spring causing the plates to bend, and the ubolts to splay outward like a deer on the ice.
     
New Posts