1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Saginaw Ps Brace Questions.

Discussion in 'Early CJ5 and CJ6 Tech' started by justin_bongo, Oct 4, 2019.

  1. Oct 4, 2019
    justin_bongo

    justin_bongo Member

    Pampa, TX
    Joined:
    Oct 8, 2014
    Messages:
    94
    Gents,
    When adding a M.O.R.E. ps clamp to gear box, am I understanding right that it should be as low as possible?
    The bearing is in the bottom of the casting, correct?
    The box I used was the same as Mcruff used.
    78 Catalina, if memory serves right.
    My particular box has webbing and I want to make sure I dont need to grind webbing away.
    Thanks,
    Justin
     
    justin_bongo, Oct 4, 2019
    #1
  2. Oct 4, 2019
    OzFin

    OzFin Vintage Jeep Guy

    Michigan
    Joined:
    Jul 16, 2007
    Messages:
    945
    I did not cut the web on mine, I installed the brace attached towards the bottom of the gear.
    [​IMG]
     
    OzFin, Oct 4, 2019
    #2
New Posts