1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

T98 And Advance Adapters

Discussion in 'Builds and Fabricators Forum' started by Mike Dreuth, Feb 17, 2019.

  1. Feb 17, 2019
    Mike Dreuth

    Mike Dreuth New Member

    Rhinelander, WI
    Joined:
    Feb 5, 2019
    Messages:
    9
    I've got a problem with my T98. Got the 712512-T98 AA kit with the new shaft and 1/2 plate, rebuild kit from Herm. Rebuild went well, pretty straight forward. Thick bearing in back, thin in front. But my oil slinger is way sloppy. Input shaft is dead center on cluster gear. Because it's a T18 shaft, is it possible I need a thick bearing in front too? I have found nothing to suggest this though.
     
    Last edited: Feb 18, 2019
    Mike Dreuth, Feb 17, 2019
    #1
  2. Feb 19, 2019
    windyhill

    windyhill Sponsor

    PA
    Joined:
    Nov 4, 2006
    Messages:
    1,502
    I'd call Herm and talk to him, he probably has a solution.
     
    windyhill, Feb 19, 2019
    #2
  3. Feb 19, 2019
    jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sheboygan
    Joined:
    Jun 28, 2006
    Messages:
    2,770
    upload_2019-2-19_11-23-28.png
     
    jeepstar, Feb 19, 2019
    #3
New Posts