1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

wheel wells and rear floor pan dimensions

Discussion in 'Early CJ5 and CJ6 Tech' started by CJ5/2A, Dec 8, 2015.

  1. Dec 15, 2015
    Steamboat Willys

    Steamboat Willys Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Paddock Lake, WI
    Joined:
    Mar 1, 2010
    Messages:
    141
    I'm not exactly sure what radius you are looking for, but I'm thinking 3" may be the number you are looking for.
     
  2. Dec 15, 2015
    y2k-fxst

    y2k-fxst Member

    North English,IA
    Joined:
    Nov 17, 2014
    Messages:
    293
    I've seen both 3" and 3.5", hoping to get and accurate measurement on mine for making my wheel tubs and quarter panels when I can get back to it after Christmas.
     
  3. Dec 15, 2015
    1960willyscj5

    1960willyscj5 Well-Known Member

    Mesa, Arizona
    Joined:
    Nov 27, 2006
    Messages:
    2,793
    How do I get a copy of these? The ones I had were lost to a computer crash about three years back.
     
  4. Dec 16, 2015
    Rick Whitson

    Rick Whitson Detroit Area 2024 Sponsor 2022 Sponsor

    I live South of...
    Joined:
    Dec 2, 2014
    Messages:
    1,725
    A beer can will work, I think
     
  5. Dec 16, 2015
    Johns1967CJ5

    Johns1967CJ5 Sponsor

    Northern NJ
    Joined:
    Dec 5, 2013
    Messages:
    1,694
  6. Dec 17, 2015
    1960willyscj5

    1960willyscj5 Well-Known Member

    Mesa, Arizona
    Joined:
    Nov 27, 2006
    Messages:
    2,793
  7. Dec 31, 2015
    CJ5/2A

    CJ5/2A New Member

    Joined:
    Dec 8, 2015
    Messages:
    12
    Does any one know the dimensions of the drop piece between the front and rear floor pan
     
  8. Jan 1, 2016
    1960willyscj5

    1960willyscj5 Well-Known Member

    Mesa, Arizona
    Joined:
    Nov 27, 2006
    Messages:
    2,793
  9. Jan 2, 2016
    y2k-fxst

    y2k-fxst Member

    North English,IA
    Joined:
    Nov 17, 2014
    Messages:
    293
    I'll try to measure the one I've got made for mine this weekend. Know it's 59" wide, just can't remember off the top of my head how tall it is.
     
  10. Jan 2, 2016
    y2k-fxst

    y2k-fxst Member

    North English,IA
    Joined:
    Nov 17, 2014
    Messages:
    293
    Stopped in the shop after I got home, the riser I made for my CJ6 is 59" wide, by 4 7/8" tall with 3/4" flanges on both short sides and the bottom long side. Still have to make the notch in it for the transmission hump.
     
  11. Jan 27, 2016
    CJ5/2A

    CJ5/2A New Member

    Joined:
    Dec 8, 2015
    Messages:
    12
    Navy could you give me the measurements for the rear floor pan reinforcements, how far from the front drop piece are they . The old body has none because it's not original .
     
  12. Jan 28, 2016
    CJ5/2A

    CJ5/2A New Member

    Joined:
    Dec 8, 2015
    Messages:
    12
    I need the measurements of the floor pan reinforcements and where they are located dimensionally
     
    omartinezmisle likes this.
  13. Mar 24, 2016
    omartinezmisle

    omartinezmisle New Member

    ...
    Joined:
    Dec 4, 2015
    Messages:
    2

    Good day forum friends , someone or you would be kind enough to climb back these images ? For my project I need cj5 1960 floor dimensions because I have no references to manufacture oxide were removed , especially the back and not front hat channels and sheet metal , thank you, thank you very much.. omartinezmisle@gmail.com
     
    Last edited: Mar 24, 2016
  14. May 7, 2016
    Don X

    Don X The Prodigal Moderator Staff Member 2023 Sponsor

    San Diego,...
    Joined:
    Mar 30, 2007
    Messages:
    3,383
    These pics aren't showing up anymore. Does anyone still have them?
     
  15. May 8, 2016
    Rick Whitson

    Rick Whitson Detroit Area 2024 Sponsor 2022 Sponsor

    I live South of...
    Joined:
    Dec 2, 2014
    Messages:
    1,725
    Just a suggestion, when I done mine I welded a thin walled 1" box tube along the rockers and across the trans hump just because I could. It has to help make the body more ridged. I also welded a 1" X 1" X 1/8" angle along the bottom edge of the box inside of the wheel wells to reinforce the box. I figured I only wanted to do this once. Just a suggestion. While you are welding, I put 2, 1" X 1" box tubes inside the kick panels under the dash to mount speakers on. Just a suggestion.
     
  16. May 10, 2016
    omartinezmisle

    omartinezmisle New Member

    ...
    Joined:
    Dec 4, 2015
    Messages:
    2
    IMGPLANS.jpg Friends DON and RICK , grateful for your help , even can not find the images of measurements that need panels , those are here garbled , attached some of the work I do to share and help enthusiasts future , I hope to find to complete my work restoration and plans to repair other...
     

    Attached Files:

    timgr and Don X like this.
  17. May 11, 2016
    Rick Whitson

    Rick Whitson Detroit Area 2024 Sponsor 2022 Sponsor

    I live South of...
    Joined:
    Dec 2, 2014
    Messages:
    1,725
    Nice drawing, I never noticed before, there is a body mount under the tool box, but not on the drivers side? I will have to look at mine, it seems like they were even, can't remember, comes with being old I guess. I added two more at the firewall, instead of the pads.
     
  18. May 11, 2016
    1960willyscj5

    1960willyscj5 Well-Known Member

    Mesa, Arizona
    Joined:
    Nov 27, 2006
    Messages:
    2,793
    Won't be one on the drivers side. Would interfere with the gas tank.
     
  19. Jul 12, 2016
    3rdgenjeeper

    3rdgenjeeper Member

    Charleston sc
    Joined:
    Jun 16, 2016
    Messages:
    60
    I hate to bring this one back from the dead... BUT I'm looking for the dimensions from the top of the trans hump to the bottom of the rear floor.
     
  20. Jul 13, 2016
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    Glad you did... I was just starting to find it for you. I thought the drawing had measurements... Drats! :mad:
     
New Posts