1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

First overdrive...what parts are missing.,,,

Discussion in 'Early CJ5 and CJ6 Tech' started by all4jpn, Oct 26, 2015.

  1. Oct 26, 2015
    all4jpn

    all4jpn Member

    fredericksburg,va
    Joined:
    Dec 16, 2006
    Messages:
    363
    Got a great deal on an overdrive...can you all look at the pic and tell me what I'm missing... [​IMG]
    Other than a new gasket and knob...copper washers on the bolts?
     
    all4jpn, Oct 26, 2015
    #1
  2. Oct 26, 2015
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,517
    Appears to be 26 tooth.
    Verify spline and tooth count for your application.
    Shift rod/lever appears to be for T90.
    Although the overdrive lever bracket that bolts to the transmission top cover is missing.
    One of the wide head clevis pins is missing as well.
     
    jpflat2a, Oct 26, 2015
    #2
  3. Oct 26, 2015
    all4jpn

    all4jpn Member

    fredericksburg,va
    Joined:
    Dec 16, 2006
    Messages:
    363
    thanks...it is 26 tooth and its going in my 2a (put it here as this forum gets more traffic)...any clue where the circle snap ring goes?
     
    all4jpn, Oct 26, 2015
    #3
  4. Oct 26, 2015
    Zoomer

    Zoomer eJeeper (walking)

    Minnesota
    Joined:
    Sep 22, 2002
    Messages:
    1,092
    From what I can see it is missing a shipping box and the label with my address on it. :)

    Sorry I'm not more help.
     
    Zoomer, Oct 26, 2015
    #4
  5. Oct 26, 2015
    Daryl

    Daryl Sponsor

    Bonney Lake, WA
    Joined:
    May 25, 2006
    Messages:
    2,879
    All the installation instructions are listed at hermtheoverdrivguy.Com. Always best to go through it before you install it. The lock washer and snap ring will make a lot more sense once you read the instructions.
     
    Daryl, Oct 26, 2015
    #5
  6. Oct 26, 2015
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,517
    r)
     
    jpflat2a, Oct 26, 2015
    #6
  7. Oct 26, 2015
    scott milliner

    scott milliner Master Fabricator

    Seattle Wa.
    Joined:
    Dec 17, 2002
    Messages:
    2,362
    Herm's instructions are not complete. I just installed Advanced Adapters Overdrive. I have the complete instuction that also include total disassemble. I can scan it if you need it.
     
    scott milliner, Oct 26, 2015
    #7
  8. Oct 26, 2015
    jeepermc

    jeepermc Active Member

    Western WA
    Joined:
    May 25, 2011
    Messages:
    1,191
    Missing a longer bolt? I don't recall the e clip.... Not sure that goes to the OD. And as mentioned the clevis pin and mount bracket for the shifter.
     
    jeepermc, Oct 26, 2015
    #8
  9. Oct 26, 2015
    oldtime

    oldtime oldtime

    St. Charles,...
    Joined:
    Aug 14, 2006
    Messages:
    3,473
    The small circular snap ring holds the shift lever onto the shift pivot bracket.
     
    oldtime, Oct 26, 2015
    #9
  10. Oct 26, 2015
    all4jpn

    all4jpn Member

    fredericksburg,va
    Joined:
    Dec 16, 2006
    Messages:
    363
    Scott , if you want to scan it....sure! Guess I'll have to fab a bracket....not complaining at $450 delivered!!
     
    all4jpn, Oct 26, 2015
    #10
  11. Oct 26, 2015
    colojeepguy

    colojeepguy Colorado Springs

    At the foot of...
    Joined:
    Apr 4, 2010
    Messages:
    7,148
    That's a good price....you can download the installation instructions on the Advance Adapter site.
     
    colojeepguy, Oct 26, 2015
    #11
New Posts