1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Choke Control Placement- Need Measurements

Discussion in 'Early Jeep Restoration and Research' started by Leathernek, Feb 16, 2013.

  1. Feb 16, 2013
    Leathernek

    Leathernek Member

    Northwest Georgia
    Joined:
    Mar 19, 2012
    Messages:
    110
    hey guys,

    So I've poured over the threads in the search function and all I can find is where the choke goes-bottom left of the speedo-got it. My question is- what is the measurement from the ignition switch to the center of the choke knob for a '63 CJ5? I've got an aftermarket tub (that came with no holes) and didn't cut this one out and have since gotten rid of the original dash. Can anyone give me a good accurate measurement? I assume the choke is in line with the ignition switch?

    Thanks,

    Leathernek
     
  2. Feb 16, 2013
    Steamer

    Steamer Thick and gritty!

    SW OR
    Joined:
    Oct 17, 2004
    Messages:
    389
    Actually, no. The choke is level with the headlight switch, and equidistant from the speedo. The hand throttle knob (if you have one) is below it similarly spaced.
     
  3. Feb 17, 2013
    Leathernek

    Leathernek Member

    Northwest Georgia
    Joined:
    Mar 19, 2012
    Messages:
    110
    Oh ok, thanks man....
     
New Posts