1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Disc brake caliper mounts

Discussion in 'Flat Fender Tech' started by garage gnome, Nov 16, 2012.

  1. Nov 16, 2012
    garage gnome

    garage gnome ECJ5 welder

    Western MA
    Joined:
    Jun 19, 2009
    Messages:
    3,092
    Will disc brake caliper mounts from an 86 K20 w/D44 (at least I think it is) front fit my D25 axle?
     
    garage gnome, Nov 16, 2012
    #1
  2. Nov 17, 2012
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    You really want the K10 1/2 to. Mounts. The k-20 mounts place the caliper incorrectly (farther from center). They will work but the caliper and pads won't line up right on the rotor and part of the pad will hang off the rotor.


    Sent from my iPhone
     
    nickmil, Nov 17, 2012
    #2
  3. Nov 17, 2012
    garage gnome

    garage gnome ECJ5 welder

    Western MA
    Joined:
    Jun 19, 2009
    Messages:
    3,092
    Ok, thanks, jut making sure I didn't want to save them before I scrapped the truck.
     
    garage gnome, Nov 17, 2012
    #3
  4. Dec 16, 2012
    andy howell

    andy howell Member

    Thomastown...
    Joined:
    Oct 25, 2008
    Messages:
    119
    garage gnome if you are scraping a gm 3/4 can i buy the wheel ends from the front axle? thanks
    andy
     
    andy howell, Dec 16, 2012
    #4
New Posts