1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Spartan turn signal switch with painless harness?

Discussion in 'Early CJ5 and CJ6 Tech' started by Resto-Mod 68, Jul 20, 2011.

  1. Jul 20, 2011
    Resto-Mod 68

    Resto-Mod 68 New Member

    Northern Michigan
    Joined:
    Oct 14, 2010
    Messages:
    39
    Has anyone used the old Spartan switch with the modern wiring harness from Painless? I can not seem to make it work.
     
    Resto-Mod 68, Jul 20, 2011
    #1
  2. Jul 20, 2011
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,523
    jpflat2a, Jul 20, 2011
    #2
  3. Jun 22, 2012
    gscj5

    gscj5 H2 Recovery Team

    Kettering, Ohio
    Joined:
    Sep 22, 2002
    Messages:
    339
    Do we have an updated link for this?
     
    gscj5, Jun 22, 2012
    #3
  4. Jun 22, 2012
    technologyteacher

    technologyteacher Member

    Elkin NC
    Joined:
    Oct 12, 2009
    Messages:
    902
    I used the Sparton Switch with an EZ Wire harness
     
    technologyteacher, Jun 22, 2012
    #4
  5. Jun 22, 2012
    curtcanada

    curtcanada L, L, and the POH!

    Western Slope, CO
    Joined:
    Nov 25, 2008
    Messages:
    372
    I clicked on the link, then changed the ".com" to a ".net" in the address bar, and it worked.
     
    curtcanada, Jun 22, 2012
    #5
  6. Jun 22, 2012
    gscj5

    gscj5 H2 Recovery Team

    Kettering, Ohio
    Joined:
    Sep 22, 2002
    Messages:
    339
    Awesome guys! Thanks!
     
    gscj5, Jun 22, 2012
    #6
  7. Jun 22, 2012
    Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    cordele, Ga.
    Joined:
    Mar 29, 2007
    Messages:
    5,922
    The type of turn-signal switch you use doesn't matter as long as your wiring harness has the correct number of wires and they are connected to the proper lights/source/flasher/brake switch etc.
     
    Walt Couch, Jun 22, 2012
    #7
  8. Jun 22, 2012
    gscj5

    gscj5 H2 Recovery Team

    Kettering, Ohio
    Joined:
    Sep 22, 2002
    Messages:
    339
    What I need are the colors of the wires to the tail lights. For some reason I have a brake light on the drivers side out, everything else works.
     
    gscj5, Jun 22, 2012
    #8
New Posts