Rc flatty

these are the Tamiya shackles ,Mike ,,they also make super cool leaf spring revlolvers


Donkey does look a little unstable.............. and a pic of the rear view mirror all fully moveable for that just incase roll over



and how do I make this smaller so I can make a sticker out of it ..... I need it about 1"

 

I've looked at the mini-revolvers, not sure if I want to go that route. I really just want something cheap to get started and make mods later.

How about printing the above photo and then reducing it on a color copier or in a photo editor?

 

1"

 

Awsome,I see you cleaned it up also,THANKS Mike

 

That gonna work for you?

 

yup now I just need to get a sticker sheet .thank you !!!!

 

worked some more on the rc this weekend ,
ran a small bar under the fenders and tied in in tho the rock sliders

then ditched the stock bumper for something that is more rock friendly for this aluminum body. Not a fan of the stinger look but it will keep damage off the hood, and had a hell of a time bending that hoop(cold rolled steel is very hard to bend cleanly) around the grill. took 2 trys to have sides that matched .




still looking for some kind of headlights and there will be a working winch

 

You are an animal. Steve. Awesome work.

 

thanks John

 

It looks great! I hope my little commando comes out as nice.

 

Cool!

 

thats just INSANE...

i thought i did a lot to my plastic models... but this is crazy COOL...

would make for EXCELLENT winter work if your garage gets too cold to work on your 1:1

looks like a great way to money learn how to money work on money real ones... the way money that they money operate and money stuff...

is it expensive?

 

GRRRR, finally get a new battery to fit under the hood , go to reprogram my speed control to the new Lipo (from Nimh) ,,,,and the setting is not there . it was build wrong from the factory ,,,, now I have to send it in ,Dam.

 

darn speed control
will you be able to swap between Lipo and Nimh easily once it is resolved?

Thought this might help you find some lights
http://www.superbrightleds.com

 

apparently the "addendum" to the instructions that only can be read on-line that says I can use it the way it is ... on the #2 setting ...... Its all good. time to move forward and re-gear woohoo!
and yes jwjeep with the push of a button and resetting neutral I can use both types of batterys........and thanks I will check out that led site.

 

took the flatty out today ,my wife was a trooper to video it while I play
took this


to get here

to play on the rocks video below

 

Yeah! Video!

 

Really cool, man. I'm jealous. I think you drive that better than your big Jeep. Ha Ha

 

I think you drive that better than your big Jeep. Ha Ha[/QUOTE]
John,,, I don't really know how to take that ,,,,haha,

in another video I laid it over and sherri said I yelled "OH NO!!!!!",,,,,don't think I ever said that when Sway lays over .


you guys can build something very simular ,but first you need a 80's G.I. Joe Jeep off Ebay . then buy axles lockers ,rims/tires,cage, electronics,and that kit is 4 linked all around....... much better/softer suspension.Pretty Pricey ,I had everything already ,and a buddy donated the axles/lockers(spool) ,rim/tires. so I don't have much into this right now.
http://rcpcrawlers.com/product.php?productid=1549&cat=51&page=1

...... with more tweaking I can get this much flex with my lef springs...... I wanted to make it leaf sprung just to see how it does ...... and after a week of starting to wheel it , quess what .............................. IT HAS JEEP LEAN !!!!! that my friend is stupid awesome

wait till the next pic ,,,,,

 

anyone have some GI JOE stuff , looking for a rifle,handgun ,a cb/ham radio,,,,,,,,,,,,,, and well ummmm.

a slutty barbie ,the normal barbie is too tall(11") ,I am looking for her shorter sister ,Trixie.hehe,I went to the local wall mart and found myself in the doll department taking measurements ,,,,thats just not right.... she can't be more than 7 1/2" - 8" at the max