1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

M416 Fender Angles

Discussion in 'Jeep Trailer Tech' started by DanStew, Feb 22, 2019.

  1. Feb 22, 2019
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    My fenders are pretty hashed on my trailer and i have to bend and bang them back in shape.
    Could someone give me the fender angle from the top flat to the turn down?
    I measured my inside angle and it said 80 degrees, but they are so mangled i am not trusting mine.
    I am hoping to make a job to put them in and rehab them.

    Thanks!
     
  2. Feb 22, 2019
    Tom_Hartz

    Tom_Hartz Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    North Carolina
    Joined:
    Apr 9, 2014
    Messages:
    478
    I can check tomorrow for you.
     
    DanStew likes this.
  3. Feb 23, 2019
    Tom_Hartz

    Tom_Hartz Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    North Carolina
    Joined:
    Apr 9, 2014
    Messages:
    478
    My fenders are at 60 degrees. This trailer is clean from California, no rust and always garage kept. Hope this helps.
     
    DanStew likes this.
  4. Feb 23, 2019
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    Thanks Tom!! Any little bit helps
     
    Tom_Hartz likes this.
New Posts