I've got a d30 front my cj5 74, just happen to have it disassembled and took some measurements for you. The 6 stud bolt pattern is 2" to center...
Ok guys, the big move has been done. I got the pumpkin apart undid the locker housing a out pours a bunch of blended broken parts and hunks of...
i can pretty much assure you that is gear oil on the ring gear, that surface looked pretty good to me...
thanks for that input it really is appreciated and I can move forward and find out what else is wrong starting in a few days....
Ok here are some pics that were put in (thank you bkd) and if some of you guys take a look, I'm hoping you will see what I do and possibly agree...
After complete removal of left axle found inner axle spline to be in great shape not and damage to them. So I remove the pumpkin cover and now...
Ok got the pics and will try to get some set up on this thread soon I have looked alittle closer to what is in the pumkin and what I see on the...
i have a 74 cj5 and t18 trans with granny gear, I do not drive it granny at all it is not syncro and I know I have 6.32:1. reason being I also had...
sure looks wasted to me. I happen to have my spindle off and I have disc brakes and I didn't see or had any type of thrust washer in the back of...
Ok big updates to the left axle operation. I finally got the correct socket of which is a 2 and 1/16 inch. If you try even a 2 and 3/32 IT Will...
sorry guys been out of town for the 4th and now back. I took the hub off, and ckd all contacting areas and all seem good. I didn't have the...
ok I finally found time to take left front hub off, this is after I checked the front left axle by engaging 4x4 and putting transfer case into 4...
Ok, I have a dana 30 front end, (detroit locker). when engage 4wheel drive the left side axle is not locking or engaging.:shock:Manual hub is...
Hi I just got to this msg area and found your msg..Yes all you said about the np435 is correct. But trying to ship this unit would be very...
Separate names with a comma.