1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

ITLKSEZ's Recent Activity

  1. ITLKSEZ liked 73 cj5's post in the thread 3b Act II.

    Pile of parts showed up yesterday. My Goat clutch housing. The clutch fork is a GM 60s-70s part. Looks just like a Goat clutch fork so...

    Apr 24, 2024 at 12:10 AM

  2. ITLKSEZ replied to the thread 71 Wheeling Rig.

    Are you going forward or backwards? :sneak:

    Apr 23, 2024 at 7:53 PM

  3. ITLKSEZ liked Fireball's post in the thread 71 Wheeling Rig.

    They have been on the Jeep since April 2021, so right at three years now. One disadvantage to yanking a leaf is that the spring clamps...

    Apr 23, 2024 at 7:36 PM

  4. ITLKSEZ replied to the thread 71 Wheeling Rig.

    There’s very surprisingly A LOT to read.

    Apr 23, 2024 at 7:36 PM

  5. ITLKSEZ replied to the thread 71 Wheeling Rig.

    But noticeably more articulation. :sneak:

    Apr 23, 2024 at 7:33 PM

  6. ITLKSEZ replied to the thread Welding Gloves And Sleeves.

    Gloves- I use these for 80% of the stuff I do. They are AMAZING....

    Apr 23, 2024 at 5:55 PM

  7. ITLKSEZ liked Fireball's post in the thread 71 Wheeling Rig.

    From my own experience between the '69 with low-back and the '71 with high-backs: These short wheelbase, relatively stiffly sprung...

    Apr 23, 2024 at 2:27 PM

  8. ITLKSEZ liked supertrooper's post in the thread Supertrooper's CJ5 build.

    Here is a long over due update. Back in the 2023 epic Colorado trip was my first trip with ARB lockers front and rear. My steering wheel...

    Apr 23, 2024 at 10:44 AM

  9. ITLKSEZ liked jeep2003's post in the thread What's your other project (non Jeep) . . . show them off here!.

    Second test ride today works pretty good had a fuel leak pulled the tank off to fix. I guess i need to tighten the chain aswell. Very...

    IMG_7247.JPG IMG_7250.JPG IMG_7256.JPG IMG_7249.JPG IMG_7252.JPG Apr 23, 2024 at 9:19 AM

  10. ITLKSEZ replied to the thread Has My Timing "jumped"?.

    OP is wanting a yes or no answer. So, yes. If I’m wrong, you’ll find out upon disassembly as you find out what really happened....

    Apr 22, 2024 at 11:31 PM

  11. ITLKSEZ liked homersdog's post in the thread Has My Timing "jumped"?.

    Getting back to the original problem, no one can tell you a magic answer. Verify all your wiring. If it looks good then... Pull off...

    Apr 22, 2024 at 9:40 PM

  12. ITLKSEZ replied to the thread Dana 300 Or Not??.

    How much lift?

    Apr 22, 2024 at 9:09 PM
Show older items
New Posts