I think Walcks makes direct fit harnesses. https://www.walcks4wd.com/product.aspx?pid=2455
I use a Garand and 1911 to keep my hood closed. They also double as a parking brake. :)
I had the same problem with mine when I first bought it. Apparently, the orange rtv that was on the sending unit gasket turned into jello when...
I just pulled the locking hubs off of my front axle and discovered a few large cracks in the outer bearing race. Does this assembly come with the...
The line that goes to the vacuum advance on the distributor plugs into the front of the carb, passenger side. The pcv plugs into the rear of the...
Hmmm. I'll have to try that. The weights on mine do have a bit of slop to them.
Timings fine. I set it and the dwell when I put the distributor back in. I'll have to check the chain.
I have a '67 with the v6. The temp sender wire on it is blue with a yellow stripe.
I was thinking timing chain too. But the jeep supposedly only has 34000 miles on it. The compression test I did after buying it would seem to back...
Hi all. My motor had a clatter that has me stumped. It seems to be coming from the front of the motor. At first I thought that it was excessive...
I hope this helps. Sorry for the bad camera work but holding a measuring tape, jeep part, and camera requires more hands than I got....
Here's their web page. http://www.daytonaparts.com/
You wouldn't by chance have a photo showing how the cable is secured to the crossmember by the transfer case would you? My jeep arrived sans cable.
Separate names with a comma.