1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Recent Content by OHALE

  1. OHALE
    Post

    AA roller bearing conversion

    I PUTT THE AA KIT IN MY TRANSFER CASE LAST YEAR AND ITS BEEN GREAT! ITS QUIET ALL THE TIME. THE MAIN REASON I PUT IT IN WAS BECAUSE I COULD NOT...
    Post by: OHALE, Mar 1, 2016 in forum: Early CJ5 and CJ6 Tech
  2. OHALE
    Post

    Replacement steel fuel tank problem

    I HAVE A 67 CJ5 WITH V-6 MY FUEL LINE COMES OUT THE BOTTOM OF THE TANK. IT ALSO HAS A DRAIN PLUG IN THE BOTTOM. IT WAS THE ORIGINAL TANK UNTIL...
    Post by: OHALE, Feb 24, 2016 in forum: Early CJ5 and CJ6 Tech
  3. OHALE
    Post

    BDS Springs ordered, now for some new tires

    i'm on my second set of cooper discovers i bought the first set in 1987! Just replaced them last month, they had good tread but i was wary of the...
    Post by: OHALE, May 8, 2015 in forum: Early CJ5 and CJ6 Tech
  4. OHALE
    Post

    Dashpot for V6

    If you need a dash pot just go to any parts store and get a sixties gm dashpot. They were all the same. Jeep used the same suppliers as buick...
    Post by: OHALE, Apr 30, 2014 in forum: Early CJ5 and CJ6 Tech
  5. OHALE
    Post

    Brake master cylinder

    Just read this and have a quick question for anyone with info. I have a early 67 cj (single chamber master cylinder. Does the later two chamber...
    Post by: OHALE, Jan 16, 2014 in forum: Early CJ5 and CJ6 Tech
  6. OHALE
    Post

    flanged axle upgrade for 66 cj5?

    There is a company that makes new axle housings to upgrade to onepiece axles, But do to my old age i cant remember the name of the company right...
    Post by: OHALE, Jan 13, 2014 in forum: Early CJ5 and CJ6 Tech
  7. OHALE
    Post

    AA tapered bearing Intermediate shaft ?

    I also had to grind my washer to clear with a t-86, everything is stock, so i bet everyone has to clearance the washer ohale
    Post by: OHALE, Nov 22, 2013 in forum: Early CJ5 and CJ6 Tech
  8. OHALE
    Post

    Single stick transfer case boot

    quick question, did it come with the retainer ring? mine is missing and i have not been able to find another thanks, ohale
    Post by: OHALE, Oct 19, 2013 in forum: Early CJ5 and CJ6 Tech
  9. OHALE
    Thread

    67 cj-5 gas tank question

    Well, as all things happen my gas tank started leaking just as i was getting everything else up to snuff. My question is what is the difference...
    Thread by: OHALE, Oct 11, 2013, 3 replies, in forum: Early CJ5 and CJ6 Tech
  10. OHALE
    Thread

    Aa intermediate shaft upgrade

    I JUST COMPLETED MY T-86 REBUILD AND D-18 REBUILD. I INSTALLED THE A.A. INTERMEDIATE SHAFT UPGRADE AND I ALSO BUILT MY ON CHAIN CLUTCH LINKAGE,...
    Thread by: OHALE, Sep 16, 2013, 0 replies, in forum: Early CJ5 and CJ6 Tech
  11. OHALE
    Post

    transfer case leaks

    Well, i did what Nickmil suggested, feeler gauge indicated about 12-15 thous gap. I pulled it apart and I had installed the locking plate on the...
    Post by: OHALE, Sep 1, 2013 in forum: Early CJ5 and CJ6 Tech
  12. OHALE
    Post

    transfer case leaks

    THANKS, THE FEELER GAUGE IS SOMETHING THAT I'LL TRY. I WAS JUST HOPING THAT THIS IS A COMMON ENOUGH PROBLEM THAT SOME ONE COULD SAVE ME SOME...
    Post by: OHALE, Aug 26, 2013 in forum: Early CJ5 and CJ6 Tech
  13. OHALE
    Post

    AA tapered bearing Intermediate shaft ?

    I agree I just did the conversion on mine,and after putting it together things are pretty close. Of course anything can be done with enough...
    Post by: OHALE, Aug 25, 2013 in forum: Early CJ5 and CJ6 Tech
New Posts