My wife's TJ was in need of a input shaft seal on the steering box. This is well in good until I tried to find a seal kit. Come to find out an 06'...
I just aquired a new to me spare 225 with a casting number of 1381623. The other link does nothing for me so I will have to try and search for...
Wow your tranny and T-case are really clean:p I will be trying this maybe this winter so this was a big help.
I'm running 34" x 9.50" TSL's with a 3 inch lift and I get a little rubbing at full turn but other than that it is fine. Although I am running a...
Bob, I have used an NLGI #2 in gearboxes on brush hog mowers and it works much better than 85w gear oil. But in steering knuckles or JEEP...
:iagree: Good point didn't notice that right away. Could be an Aussie thing so we wouldn't understand.:D
The body mods are very unique. The grill and hood and windshield look right though. Looks neat though. The front fenders are just neat.
:iagree:
I run between 170-190 in the summer and 160-175 in the cooler months. I also run a pusher fan and not the stock fan.
:iagree::uwop:
Check the tech section and the resources section. And the bolt pattern is a 5 on 5.5 as you stated. Sounds like you have a good start. Got any pics?
We just clean out our shop and there are some small bearings which might fit. What is the part #? It is worth a shot.
Re: CJ 5 ride hight after replacing springs looks good. When I lifted my JEEP with a 3" lift and stock shackles it lifted her 5.75" to begin...
Separate names with a comma.