1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Recent Content by double R

  1. double R
    Post

    Registration issue in California

    The way I registered mine was by getting an independent Vin verifier. The person came to my place, looked at the jeep, and signed the necessary...
    Post by: double R, Nov 2, 2014 in forum: Early Jeep Restoration and Research
  2. double R
    Post

    Making plumbing vs. buying plumbing - brake and fuel lines

    I did my own brake lines from scratch and I'll second using a good quality flaring tool. The best part about being able to cut your own lengths...
    Post by: double R, Jul 23, 2011 in forum: Builds and Fabricators Forum
  3. double R
    Post

    Half a crank when hot...

    so far so good! so far it's only been cleaning up connections and replacing one of the undersized ring connector on the solenoid from the...
    Post by: double R, Jul 4, 2011 in forum: Early CJ5 and CJ6 Tech
  4. double R
    Post

    Half a crank when hot...

    I got the starter tested and it's still good. Seems to narrow it down to heat (exhaust manifold is about an inch away from the solenoid) and...
    Post by: double R, Jun 25, 2011 in forum: Early CJ5 and CJ6 Tech
  5. double R
    Post

    Half a crank when hot...

    I'll be checking the connections next... Finally have the chance to start looking into this...day off today. I did the test that Tim...
    Post by: double R, Jun 24, 2011 in forum: Early CJ5 and CJ6 Tech
  6. double R
    Post

    Half a crank when hot...

    Thanks for the replies...Not sure if my description of "half a crank" made any sense but glad you guys understood. Basically, the starter engages...
    Post by: double R, Jun 22, 2011 in forum: Early CJ5 and CJ6 Tech
  7. double R
    Thread

    Half a crank when hot...

    I've been having problems with starting when the engine is hot. It happened again just now, I make a quick stop at a store, maybe 5-10 minutes,...
    Thread by: double R, Jun 22, 2011, 19 replies, in forum: Early CJ5 and CJ6 Tech
  8. double R
    Thread

    Mirrors: passenger and driver interchangeable?

    Can the mirrors in this kit go on either side? or are they side specific? [img] I'm trying to install a mirror on the passenger side and I...
    Thread by: double R, Mar 12, 2011, 10 replies, in forum: Early CJ5 and CJ6 Tech
  9. double R
    Post

    boxing in the frame

    I used 3/16 plate for the boxing. I only strapped on the bottom side around the front and rear frame horns...it seems to me that only strapping...
    Post by: double R, Feb 1, 2011 in forum: Early CJ5 and CJ6 Tech
  10. double R
    Post

    1969 CJ5 project

    I mounted mine based on Dummy's article in JP. When unloaded, the shackle is perpendicular to the ground. When loaded, the shackle moved approx....
    Post by: double R, Jan 19, 2011 in forum: Builds and Fabricators Forum
  11. double R
    Post

    Show Us Your Jeep!

    [IMG]
    Post by: double R, Dec 22, 2010 in forum: Builds and Fabricators Forum
New Posts