I just bought a front bumper from them last night and saw the rivets and tool. Looks like it would work if you had a decent chisel and got the...
I either use cheap parts store conventional oil and Lucas ZDDP or Comp Cams oil which already has a decent amount of Zinc. BG MOA is a great...
You should be good with just the mechanical pump. I prefer mechanical pumps... had bad experiences with in line electric pumps + they're loud most...
Parts have been rolling in. Need to find some time to start getting things installed... [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG]...
If anyone is interested the pic below has the P/N for a 3 wire, 94 amp 12si with 12 o'clock position from O'Reillys with lifetime warranty. [IMG]
I saw a thread that mentioned that one. Wasn't there some clearance issues near the lower rad hose and some kind of hose reducer had to be used to...
Here's the 94 amp unit with 12 o'clock position. [IMG] [IMG]
From Champion? What year CJ and what P/N on the radiator?
On the alternator I picked up there are bolts holding the case halves together. I'm pretty sure you can remove them, rotate the case halves to...
Been doing some research on the engine/trans. swap stuff and I've been looking into a Buick 231 mated to a Ford T18 mated to the D18. I know...
I've done head first into way too many projects, lost interest and the projects died. Parted em out or sold em as is. I'm going to do small...
These are the search parameters for a 94 amp, 12 o'clock position 12si alternator at O'Reillys. 1987 Chevrolet R10 Pickup RWD with a 5.0l or 5.7l...
Easy fix for what? I picked up that 78 amp 12si yesterday. I know it would be more than enough to run the vehicle but I have a winch and I've...
If it was a dealer option do you know how the swap over switch/valve was installed? I have a ball valve that is located just left of the...
To be honest I'm not sure. Mine has one under the driver seat and one between the frame rails above the rear axle. I know one was added but I'm...
Separate names with a comma.
