Thank you everyone for all the information, I was able to get the bushing back on the lower housing. The way I have the housing clamped to retain...
I have removed the through bolt and while it looks like it should separate I haven't been able to encourage it enough to separate the 2 pieces. I...
I do have a 1967 Camaro steering box sitting on a shelf that appears functional and in good condition, I wonder if that would work as replacement...
So I've dropped the steering column before to get better access but it looks like the box is integral to the steering shafts, which requires I...
I followed a guide I saw online. I jacked the wheels off of the ground, keepimg the wheels forward facing, I loosened the set screw, and then...
Thank you, those are very helpful tips!
I already adjusted the steering box, and while all the rubber is dry rotted and will probably be the next problem, I currently think the rubber is...
If you mean how hard is it to pull the steering column out, it's not hard, I had it out recently to make it easier to work under the dash while I...
Is there a technical term for the bushing that I could search for online? The lower bushing sticks out as you say and if I try and push it up...
I have a steering column and Saginaw steering box from a 1966 Chevrolet Corvair ( I think based on the steering wheel) that was installed before...
Thank you specific numbers are useful even if I don't need them anymore!
Thank you Glenn!
I'm wondering what is the front axle width of a truck dana 25 and or 27. There is a guy near Marietta Georgia with a set he says is a dana 53 rear...
Separate names with a comma.