Looks good. Do you need to use a fishplate at the joints where you added length to the frame? I have seen that done before.
Re: Suspention Kits Questions, what to buy? Not true. I had to install a shims in the front for caster correction. Also the rear driveline...
Classic ent. Has the tub mount for the rear of the tub. Is that what you need? Or are your talking about the rubber bushings? Got mine at 4wd.com.
Maybe a carb rebuild is in order. The link is not working.
no, the flex fan is a gimmicky fan sold at auto parts stores that is solid without a clutch. Real loud and doesn't move much air.
Flex fans are junk. They make a lot more noise and don't seem to move more air. I have a 360 with a stock fan and clutch from a wagoneer. No...
Stock carb? Could be gas leaking from the carb into the motor when off. Making it flood out. Do you have to open the throttle to get it to start?
Thanks Guys. Got the wiring all done. Took out a lot of bad connectors and bs. I also ended up with 2 extra relays for future use. Hooked up...
http://www.4wd.com/Jeep-Drivetrain-Jeep-Axles-Differentials/Dana-30-44-Red-Outer-Axle-Tube-Seals.aspx?t_c=12&t_s=237&t_pt=101188&t_pn=ALY11102...
Cleaning up some wiring. I moved the ignition box from the fender to the firewall. Also brought all the wiring in the tub for a cleaner look. I...
There should be 90w gear lube not oil in there. Real thick and smelly. I would dump it all and put new in, but it will not fix damage already...
Yes, I was looking at a grant wheel. Thought I was going to have to make an adapter to cancel them. Thanks.
Just put on a 73 factory skid plate. It is in real good shape but was a bear to get to line up. Does anyone have some measurements from the...
How does the stock turn signals cancel with the smaller wheel? Does the turn signal wheel still touch the new wheel? I was looking at this same...
When I was looking at buying a Jeep, I found alot of the rust buckets and fiberglass bodies too (Minnesota). I must have looked at a dozen and...
Separate names with a comma.